China CIP Clean in Place System Automatic CIP Washing System CIP Cleaning Machine

CIP Clean In Place System Automatic CIP Washing System CIP Cleaning Machine
Main structure and working principle:
This equipment mainly consists of acid-base fluid tank, clean tank, rack, cleaning fluid dispenser and pump and other components sent.
1. Acid: lye tank and clean water tank
Three storage tanks used for storing cleaning fluid, cleaning process requirements can be prepared in accordance with cleaning fluid composition, concentration, and by acid, lye tank of steam heating coil, the cleaning fluid can be heated to the required temperature, tank is a pressure vessel, made of stainless steel plate, barrel body thermometer equipment, barrel up and down with back and output interfaces.
The top two holes and cleaning fluid inlet, the bottom also has a condensate outlet and waste outlet, clear water out of the sink device and export only, no return mouth, rinse with water is a one time emissions. The discharge pipe emissions and could no longer return to the acid, lye, in acid, lye between thetank and clean the sink. Acidbase fluid and waste water emissions in the tank connection pipe at the bottom left, open with a cover, seal the round nut, can achieve emissions.
Splitter and sent through a cleaning fluid over the external, may form a cycle of cleaning fluid return line system.
2. Rack: This rack is made of stainless steel materials, bearing in addition to cleaning liquid distributor sent all outside agencies, so that the device compact.
Basic information
CIP system function is to do automatic cleaning to surface contacting with product. The cleaning area includes inside surface of the tank, pipe, liquid carousel and other liquid channels.

Compositioncleaning agent storage tank,
acid and caustic dosing device,
heating device,
feed pump,
recycle pump,
pipes,
steam valves, etc.The critical technical parameters of cipCleaning mediaCaustic (NaOH),
acid (nitric acid or phosphoric)concentration1-3%temperatureHeated properlyflorate1.5-3m/s3 cleaning agent storage tanksAcid tank,caustic tank,hot water tank

Technical characteristics
1. there are 3 cleaning agent storage tanks: acid tank, caustic tank and hot water tank. According to the cleaning aim, the tanks could be classified as with one pipe, two pipes and multi-pipes, etc.
2. The automatic CIP system adopts automatic control to concentrated acid and caustic dosing and cleaning agent temperature.
3. The cleaning procedure is executed automatically after set.


Technical Parameters:
ModelOutcome capacity
(Ton/h )Motor power
(kw)MembraneEntrance
Diameter (mm)Size(L*W*H)
( mm)Weight
(Kg)T-111.54040321300*600*1400100T-2234040381400*600*1400200T-3348040481600*750*1750200T-4458040482550*750*1750250T-5578040602550*750*1750300T-1010118040603000*800*2000600T-1515168040723000*1250*2000840T-2020308040603000*1800*20001250