China CNC Router Vacuum Pump Fan Blower with Great Price

CNC Router Vacuum Pump Fan Blower with Great Price
IP54 insulation class F
High pressure electric blower
Compact small and light
Run constantly for 24 hours
Easy installation
Die cast aluminum
Precise impeller and cover
Simple operation
Parameter for piston type vacuum pump for GS cnc router vacuum pump with great price
Structure
Double stage
Type
Air blower/ Bomba D Agua
Pressure
High pressure
Power Source
Electric Blower
Rated Voltage
345-415V/600-720V/50Hz
Rated Power
5.5 kw
Max pressure
45Kpa
Max vacuum
-36Kpa
Maximum flow
520m3/h
Weight
65kg
Insulation Class
F
Material
Die cast aluminum
Application
widely used in metallurgical, chemical,
food, electronic,coating, etc
Before You Start
1.Should take measures to minimize the loss of the pipeline in order to reduce the loss of pressure and flow.
2.Should use the occasion to correctly estimate the pressure and flow of the work place, in order to select the appropriate type of air pump and piping.
3.Normal working power floating shall not exceed ten percent of the rated voltage.
4.Pump should be placed above the horizontal ventilated and dry place.
5 non-hazardous liquids into the pump body.
6.The air pump not have a corrosive, explosive materials used near.Air pump using ambient temperature -10 ~ 40 altitude higher than 1000 m parameters will change.
7.Users should professionals device protection switch and ground.User maintenance, overhaul air pump should be cut off the power.