China CNC Tool Setter CNC Tool Calibrator Tool Breakage Measure Tool Measure Ttc200 Similar Renishaw Probe

Composition of tool setter:
TTC200 cable tool setter consists of a hardware and the software. The model of the software is SP-T10; the hardware also has a mounting base.
Technical Parameters:
The diameter of the touching pillar( for cutting tool touching): 12.7±0.005mm; the pillar's hardness : HM8.5 ;
Sensing direction of the pillar: ±X, ±Y, -Z;
The trigger repeatability of the pillar(2σ): ≤ 2 μm;
Input voltage is 24±10% V DC and output load current is 50 mA;
Seal grade: IP68.
Technical Characteristics:
Tool setter transmits signal through cable, reversal connecting tool setter's power supply can reverse the state of the output signal;
The position of tool setter pillar can be roughly and precisely adjusted by the connecting link of the pillar and the adjusting link of tool setter for mounting.
One LED indicator light is used to display the tool setter's working state.
Application:
Set lengths parameter of cutting tools automatically before CNC processing;
Detect wear and breakage of cutting tools automatically between two processes or after the CNC processing;
Through checking cutting tool parameters to control the change of machining precision from the temperature change of the machine;
Applicable equipments: various specifications of machine centers, CNC milling machines, drilling-tapping machine centers, etc;
Tool setter's cable: TTC200 tool setter is equipped with 6m long, four-core,anti-oil shielding , moving cable and with a 3m-long stainless steel protecting sleeve.
Notes for purchase:
As for the cable length, verify whether the cable length equipped is enough for installing the tool setter on your machine tool; If lengthening cable is needed, special instructions should be given when ordering the product;
If the square pillar of tool setter is needed, customers should give special instructions when ordering the products.