Cable ball float liquid/water float level sensor switch for pump and controller
Cable ball float liquid level switch By the use of plastic injection molding integrated devices, so structure strong, stable and reliable performance, at the same time, non-toxic, corrosion resistance, easy installation, low prices, multipoint control for a long, heavy water pump, volatile liquid or impurity liquid good control effect.
Cable ball float liquid level switch due to its simple, reliable, economic and convenient features, make it widely used in all kinds of large container liquid level control, especially in the municipal water supply and drainage, fire fighting, water treatment and other industries preferred.
Detailed introduction to float level switches:
Float switch; Liquid level switches; Float switch; Float level switch;
For sewage water, well water, acid or aqueous alkali corrosive fluid level control, pump control
Basic Parameter:
1. Rated Voltage: 220VAC
2. Rated Current: 10A
3. Rated Frequency: 50Hz
4. Power Consumption: 1.5 KW
5. Protecting Grade: IP68
Liquid TemperatureMin 0°C (32°F)
Max 60°C (140°F)Liquid DensityMin .65g/cm
Max 1.5g/cmProtectionIP68 @ 20m (65ft)Working Pressure.35MPaSwitching Speed600/minContact Life10 million switchesContact TypeMicroswitch with NO and NC contactsSwitching Angle25° (from horizontal)Max Voltage240VacMax Current10amp (COS 0)Cable MaterialNeoprene Rubber, PPCable Size3x0.5mm2; Ø7mm / 3 x 0.75mm2Housing MaterialABS - AcrylonineChemical ResistanceAcid- Good
Alkaline - Good
Petro - Good