General description
Multiple conductor cable manufactured with three soft drawn copper conductors with semiconductor shield over the conductor, cross-linked polyethylene insulation (XLPE), semiconductor insulation shield and individual electrostatic soft copper tapeshield. They have two bare soft drawn copper neutral conductors and a ground check conductor insulated with yellow thermosetting material, filled circular section and thermosetting polyvinyl chloride outer jacket (PVC).
Main applications
Mine cables MP-GC type, XLPE-PVC are used to supply electrical power to semi-portable equipment in mines or stationary installations inside the same.
ICEA S-66-524 Cross linked thermosetting polyethylene insulated wire and cable for the transmission and distribution of electrical energy (electrical conductors with cross-linked polyethylene isolation)
Characteristics
Maximum operation tension: 5 000 to 15 000 V.
Maximum operation temperature: 90º C.
Soft drawn copper conductor, in sizes from 13, 3 to 253, 4 mm2 (6 AWG to 500 kcmil).
Copper tape electrostatic shield.
Color Coded Phase conductors.
No flame propagation characteristic.
Black outer jacket.
Advantages
Meet the no-flame propagation test (NMX-J-192).
Can be installed in wet locations.
The ground check conductor allows a safer operation of the electrical system, since it is possible to constantly supervise the isolation resistance of the phase conductors.
Awarded the MSHA certification (CFR Title 30 Federal Regulations).
No existen especificaciones té Cnicas para este producto.
Cable G Rounded Type, 2 kV Cable G-GC Rounded Type, 2 kV Cable MP-GC Type, EPR-CPE, 5, 8 and 15 kV
Cable SHD-GC Type, 2 kV Cable SHD-GC Type, 5, 8, 15 and 25 kV Cable W Rounded Type, 2 kV 2, 3 or 4 conductors.
Cable W Type, 2 kV, 1 conductor.