China Cable Produce Machine

cable produce machine
- Mode : WLT800;
- Application : Apply for twisting core cable, and bunching copper wires; the cable size up to 6mm2;
- pay offs: 90 heads spool of 250mm
- Bobbin size(mm): 630/650;
- Max. Twisted size : 1.0mm2~6.0mm2;
- Inlet copper wire range(mm): 0.15 ~ 1.0;
- Twisting Pitch(mm): 11.15 ~ 60.24;
- Direction : "S" or "Z";
- rotation speed RPM(r/min): 0 ~ 2000;
- Main shaft Height: 850;
- Noisy : ≤85db
Technical specification:
- Motor : 7.5KW(SIEMENS)with inverter
- Take up Tension control : Manual by spring. It can adjust tension and keep it steady when the machine running from empty bobbin to full bobbin
- Bobbin lifting : By hydraulic
- Electrical control device: By Buttons
- Automatically operation system: With function of auto wire breaking fault alarm, setting length, full bobbin automatic stop, save data system, operation instruction and so on.
- Operation interface: Buttons
- Traverse : By rod and pitch Adjustable.
- Brake device : Electrical magnetic (inside and outside).
- Auto oiling pump : Auto lubricating greases according to the setting program timely
Machine structure:
- Machine body : Q235 Material; Machine body is welded by iron board, and annealing treatment, eliminate the internal stress and then do the precise integrated borehole in the boring machine.
- Main shaft : 40Cr Material; the main shaft is made HB250 hardening and tempering treatment to make sure eliminates the internal stress and increase the shaft strength. The bearing site surface has been made high frequency treatment to improve abrasive resistance.
- Bow material : spring steel belt.
- Guide device: ceramic eye hole + pulley wheel.
- Mail bearing : NSK from Japan.