China Cable Tray Perforated Ladder Birdge Slotted Channel Roll Forming Machine

Cable Tray Perforated Ladder Birdge Slotted Channel Roll Forming Machine
Simple introduction:
Cable Tray Roll Forming Machine is a kind of equipment for making cable tray by various material. In the
electrical wiring of buildings, a cable tray system is used to support insulated electric cables used for power
distribution and communication. Cable trays are used as an alternative to open wiring or electrical conduit
systems, and are commonly used for cable management in commercial and industrial construction. They are
especially useful in situations where changes to a wiring system are anticipated, since new cables can be
installed by laying them in the tray, instead of pulling them through a pipe.
Drawing:
Finished product show:
Components of Cable tray roll forming machine:

Product Name

Cable tray roll forming machine

Material

Galvanized steel coil

Type

Solid type, ladder type side rail, cover

Width adjustable(mm)

100-600

Height adjustable(mm)

50-200

Thickness(mm)

0.6-2.0

Feeding width(mm)

120-1000

Tield stress(Mpa)

Q235-345

Max.forming speed (m/min)

6-12m/min

Size tolerance

±1mm

Size changing way

Full automatic

Power

3*4kw+5.5kw+11kw

Roller material

#45 steel with hard chrome treatment

Cutter material

Cr12MoV with quenching treatment

Dimension (L*W*H)

about 25000*2000*1500mm

Weight (KG)

about 30000

Working flaw chart:
Whole line description of Cable tray roll forming machine:
Part 1, Deociler
Width of material: 225-1020mm thickness: 1-2mm;
Inner diameter of coil: 508mm;inner expansion range: 480-520 mm;
The maximal of Diameter: 1500mm; The Maximal of loading: ≤5T
Motor power: 5.5kw frequency change control
Press material type: pneumatic press material
Feeding speed: 0-15m/min, adjustable
Leveling part
A: working roller: nine rollers type leveling machine
B: Feature of structure: after the quenching and tempering, chrome-plating processing, the rigidity, surface
roughness of the roller etc. are all enhance greatly; It is composed by the clamping roller and the leveling roller,
the clamping roller may the independent control, the leveler has one pair of horizontal guide roller and two pairs
of vertical guider roller and easy to adjust by hand wheel. Between the leveler and the feeding device, there is
optical sensor, sends out the feedback signal to the control system, the control system sends out the instruction
to the frequency conversion motor to change speed, Achieves the uninterrupted level goal.
Punching Machine
Model of punching press: JF21-120B
Power:160t
Motor power:5.5kw
Speed:10m/min
Feeding part
A: function: material feeding
b. Feature: Uses the servo motor-driven .Multistage type feeding: May input 10 group of different feeding lengths.
The liquid crystal touching screen demonstrated is advantageous for the change, establishes various technical
parameters. The auto-induction start system and the punch press linkage (control punch press start).
Roll forming unit
Forming station: 14sets
Forming variety: Column frame
The diameter of the roller axis: 80mm
Hydraulic cutting
Cutting type: hydraulic cutting
Blade type: close type die cavity cutter
Hydraulic power:5.5kw
Material of blade: Cr12, quench treatment, hardness HRC56-58
Quantity: 9 (depend on customer request)
Electric control system
A: Full line is controlled by PLC control system,touch screen operation to achieve the human and PLC interactive.
The operator can monitor the setting program (programmable control) and modify the parameter to control the line.
Also can check the running status, parameter and error indication etc..
B: Operation type: manual /auto two type switch. In manual position: can run the each part of the machine. In auto
position: can run the full line. The emergency was stopped ensure the safe of the equipment and operator.
For more details about the Cable Tray Perforated Ladder Birdge Slotted Channel Roll Forming Machine,
pls just contact me at anytime.