We are a professional manufacturer of Tungsten CarbideTools, and can supply you with TNMG Series Turning Inserts:
1. Super fine grain size material.
2. Excellent toughness and hardness.
3. Diversity of Chip-breaker for different workpiece materials.
4. Special grades for different workpiece materials.
5. Advance CVD multi-layer coating technology for extended tool life.
The Turning Inserts also can be made according to your own specification or against samples.
CVD Coated Grades are as follows:
CVD Coated Grades are as follows:
GradeDescriptionEquivalent to ISOJCP1015MT-CVD coated, the substrate with excellent wear resistance in combination with TiCN+Al2O3(thick)+TiN multi-layer coating, which is suitable for finishing of steel.P05~P15JCP2015MT-CVD coated, Cutting edge with good toughness in combination with TiCN+Al2O3(thick)+TiN multi-layer coating, which is suitable for semi-finishing of steel.P10~P25JCP3015MT-CVD coated, the substrate with excellent toughness and plastic deformation resistance in combination with TiCN+Al2O3(thick)+TiN multi-layer coating, which is suitable for roughness of steel.P20~P35JCM1015MT-CVD coated, the substrate with excellent wear resistance in combination with TiCN+Al2O3(thick)+TiN multi-layer coating, which is optimal for finishing and semi-finishing of stainless steel.M05~M15JCM2015MT-CVD coated, the substrate with special micro structure in combination with TiCN+Al2O3(thick)+TiN multi-layer coating, which is optimal for finishing and roughing of stainless steel.M10~M25JCM3015MT-CVD coated, the substrate with excellent toughness in combination with TiCN+Al2O3(thin)+TiN multi-layer coating, which is optimal for semi-finishing and roughing of stainless steel.M20~M35JCK1025MT-CVD coated, the super fine grain size substrate with excellent hardness in combination withAl2O3(extra thick) + TiCN(thick) coating, the smooth surface, which is suitable for turning and milling of grey cast iron at high speedK05~K15JCK2025MT-CVD coated, the substrate with excellent hardness and stripping resistance in combination withAl2O3(thick) + TiCN(thick) coating, the smooth surface of the tools, which is suitable for turning and milling of cast iron at middle and high speed.K10~K30JCK3025MT-VD coated, the substrate with excellent wear resistance and toughness in combination withAl2O3(extra thick) + TiCN(thick) coating, which is suitable for the milling of cast iron(for example, nodular iron) at middle and high speed and interrupted turning.K20~K35