China Carbide Sandblasting Nozzle Direct Insert Type Sandblast Gun

Various Kinds of Carbide Sandblasting Nozzle
direct insert type sandblast gun
Divided Venturi nozzle structure contraction section, straight sections and diffusion segment of three parts, aerodynamic performance is superior to straight bore nozzle, vortex phenomenon is significantly improved or ceased to exist, the pressure loss is greatly reduced, at the same pressure conditions, increase exports to more than double the speed of the abrasive, work efficiency increased by 15% -40% compared to straight bore nozzle, abrasive consumption reduced by 20%.
Single inlet nozzle is a time into the wind. Double inlet is the second into the wind, before and after the two nozzles, there is space betwe+R[3]Cen the two, at around eight holes at intervals, in such a large and one small, the nozzle arrangement in a previous post, As the role of the high-speed air stream to produce a sufficiently large negative pressure, RC air is drawn into the nozzle, the discharged air is greater than the compressed air into the nozzle outlet velocity abrasive increased again. In addition, double inlet jet produced sand lance end diameter larger than a single into a number of wind divergence surface abrasive stream into 30% larger than a single wind, higher cleaning efficiency.

Sandblasting gun thread specification:
Standard inch thread: 1-1/4 ,11-1/2 N.P.S.M.
Coarse thread: 2 ,4-1/2 U.N.C.
Inside diameter
Outside diameter
Length
1/4 Inch (6.4mm)
1-5 /8 Inch (36mm)
130mm
5/16 Inch(7.9mm)
1-5 /8 Inch (36mm)
150mm
3/8 Inch (9.5mm)
1-5 /8 Inch (36mm)
170mm
7/17 Inch(11.1mm)
1-5 /8 Inch (36mm)
200mm
1/2 Inch (12.7mm)
1-5 /8 Inch (36mm)
210mm
Sandblast gun for suction Sandblast cabinet
Suction sandblast gun with nozzles . have Sup-pressure and pressure-type two types . blasting gun materials,
processing methods mainly: aluminum alloy die-casting, brass casting, iron, stainless steel welding, casting,
such as polyurethane.
We have A B C type Sandblast gun with nozzle 35mm 50mm 60mm and 80mm