China Carrier Tape Forming Machine

Carrier Tape apply to the IC, SMT semiconductors, crystal and other chip components of the SMD tape packaging. Piezoelectric crystal industry specifications: 49U/SMD, 49S/SMD, UM-1/SMD, UM-5/SMD, SMU7, SMU5, osc half 8045, 7050, 6035, 5.32, 4023, 3225 and other SMT.
Carrier Tape by three or PS single sheet on the sub from the materials, advanced specialized equipment from material processing to computer on-line scout molding processing technologies from the vacuum forming. Punching positioning of the automatic admission materials overall consistent materials, in addition to precision and acurate, fast and in EIA standard can satisfy environmental cold, heat, manetism, ultraviolet, anti-static and other electronic properties of the demand.
High-speed particle forming carrier tape machine
High-speed particle forming carrier tape machine named particle forming machine for short, it is a sophisticated machine we researched and developed successfully in 2005. After years of accumulation and improvements, our machine is at a leading position in this industry.
Linear speed of the machine can reach 25m/min as each individual tape; There are two models of our machines: One into 4; One into six. In the market, single layer tape and 3-layer tape are available. The single layer tape is made of PC; The 3-layer tape is made of PC and PS: Top layer and bottom layer are of conductive PS; The middle layer is transparency PC.
It is featured by an advanced production technology: Putting plastic raw materials directly in the machine, then extruding--molding --punching slitting- final winding in mode of complete automation. Since three layers coming into shape at one time; Simple process and high efficient utilization rate of raw materials, it has replaced the traditional 2-time forming technology. It greatly reduces the production cost and its production efficiency is dozens of times of the traditional one.
Tape specifications:
Thickness: 0.2mm-0.5mm
Width: 12mm, 16mm, 24mm, 32mm, 44mm, etc.
Black Conductive PS Sheet for Carrier Tape
RoHS standard
PS Sheet is black carrier tape material with good rigidity and strong toughness
Recommended for packaging of IC electronic components
Why choose us?
1. Quality Control
We make quality control for each item separately. All the machine parts must go throgh five checks before manufacturcing process. Full check after every individual process finished. Full check after production half done. Shipping department checks each item before packing, totally avoiding manufacturing defects.
In order to reach the full satisfaction of the Customers, YAOAN has always given an absolute priority to products quality and excellence of technical/commercial assistance services. Got the certifiedquality system ISO 9001/CE, as a proof of our high standard quality, from R&D up to the production and after sale service.
2. Packing
We use wooden box to pack the machines to avoid damage during seaway shipping.
3. Service
Customers logo are acceptable
We will take trial all the machines before shipment. Customer can come to our factory to see the machine in running condition.
Our objective is to give our customers a complete service, not limited to the mere delivery of the commissioned line, but assuring at the same time an high level support both in the contractual phase, regarding the choice of the production line more conforming their requests, both during the after sale service.
4. Guarantee:
One year free. The only promise is that the user must not violate the operation regulations. The parts are limited to screw, barrels, inverter motor, temperature meters and AC contractor.

Contact person:Mr.Ryan Tan
Mobile:008613825752088