China Ce Approved Portable ND-YAG Laser Hair Removal Machine for Salon

ΔIf you want to buy only one piece, please contact us at any time.
Working Principle
ND-YAG laser Tattoo removal machine gem Q-mode, the effective use of high-energy laser shot smashed the lesions in the pigment. The photo-induced burst principle: given the use of high-energy laser instantaneous, so that the irradiated energy is absorbed by pigment particles after the expansion of rupture, a split into more small particles removed from the body, part of the body excreted through the lymphatic system to remove the pigment. As the normal tissue of the 1064nm laser is not absorbed, thereby maintaining the integrity of the cell framework, the conditions must not form a scar. This is the way any other can not be compared. Because eliminate the color laser does not destroy normal tissue. Therefore, the safety of the greatest hand to ensure customers will not be troubled by complications.
The energy of Q-switched ND:YAG laser can be absorbed by the blue and black melanin.The melanin will be fragmented so small that they can be metabolized by the lymphatic system or egested out of the body. Thus the tattoo or other pigmentations will be removed without damage to normal tissue. The treatment is safe and convenient without downtime and side effects.

Parameter

Type of laser ND Yag laser/Q-switch Aming LightRed infrared lightPower800wEnergy0-2000mjPulse width~10nsRecurrence rate1-10HZScreen8 inch color touch screenLaser wavelength1064nm/532nm/1032nmLaser Recurrence rate1-10HzRed infrared light1-8mm(continously adjustable)Cooling systemWater+Wind

Application
The system gem_adjusting Q switch can effectively curethe mixed pigments by pigment precipitation of extraneous source withpathological pigment change of endogenous source, inclusive of erroneous darkeyebrow-embroidery, lip-embroidery, lip-soak, eye line-embroidery, lipline,tattoo (inclusive of tattoo by extraneous wounds), pigment precipitation bysensitive source, freckle on female's face (male's), coffee spot, old agespot, black mole, and birthmark in black, blue, purple, brown, red and etc.Treatment course for different illness case as follows:
1320nm wavelength fliter :clean pores , Skin whitening and tightening.(Black doll operation)
Taking advantage of tight adsorption and ultrafine of nano-activated carbon, penetrate the pores effectively and suck annoying grease and dirt tightly. as well as absorb the superstrong laser energy fully under laser irradiation. resulting in nanoactivated carbon toner blasting, can shatter deep dirt effectively. The high heat energy stimulate fully the skin dermis collagen rebirth and shrink collagen tissue fibers. So as to achieve face whitening, dilute spots, shrink pores, black head removal.

Advantages
1.High energy,high power.
2.High frequency up to10HZ every fast shooting , save treatment time and effective
3.Yellow crystal robs handle
4.Portable
5.CE Approved
6.New design
7.4.3 inch color touch screen
Display Machine

Before & after treatment by laser

1. Preparation before treatment by

No inflammation in the treatment part.

No treatment for pregnant woman.

Fomentation on the treatment part avoid skin dehydration.

No cosmetic left, clean the treatment part.

Taking photo before treatment, compare the effect after operation.
2. Skin appearance after treatment

Reddish swelling on treatment part on the moment, it will disappear shortly.

To some special customers need to be higher, when you make the Volt too high, there comes the scab, but it will drop off naturally after 7 days, not to scratch it, skin becomes normally about 2 days. Taking some Vitamins can lighten the pigment circumfluence. Usually there is a feeling of scorching or slight bleeding; it is normal and no scar.

When the scabs fade away, the treatment part shows pink, weeks later it appears coffee color, and 1-2 months later recover.

3. Care after treatment

1)You may clean the skin with non-stimulator water after treatment.

2) If there is slight bleeding when adjust the Volt higher, please wipe off and smear the Antiphlogistin (such as Illotycin) until the scar drops off. Not cosmetic or other medicines.

3)If the treatment parts is flush and feeling it not comfortable, can do ice compress.

4)Before the scab dropping off, the treatment part must be care not to touch water, not being scratching, avoiding certain food of hot, dark color of coffee, Coco Cola etc. Prohibit smoking and drinking .Let the scabs desquamate naturally not scale off in a force.Not taking plenty of sports avoiding of sweat infection.

After the scab desquamating, No need to coat the Illotycin (Erythromycin) again, just smear the suntan lotion (SPF15 upwards) even in the room preventing UVA/UVB and keep along 3 to 6 months because of the treatment skin sensitivity to the sunlight. Using suntan lotion or umbrella preventing can improve the effect early.

Period for laser treatment: According to the different treatment parts and pigment dark or not, the treatment may be several times. Normally one period of treatment is 1-2 times, every time at 20-30 days interval. If there is no special, every 2-4 weeks go to clinic check again, if there is anything abnormally, please cure it early.Pigment fadeaway is a slow process, for the pigmentation skin, normally it is 1-3 months. In order to get more favorable effect, repeated treatment should be 1-3 months interval.

Our Services
One year warranty: if there any problem happens with machine, we will repair it free of charge
Convenient training: operation video is available,and we can provide the online training
OEM/ODM services: logo, language, interface can specially be designed

Delivery and Shipping
Delivery within 3-5 days off season, 5-7 days busy season after payment.
Shipping Way: DHL, UPS, TNT, FedEx etc express couriers' door to door service and by air or sea.

about us
We are specialized in Beauty and Medical Equipment with professional R&D department, Design &Production and Sales &Service team. Our machines are sold all over the world, and get good feedback .