China Ce FDA Fingertip OLED Display Blood Oxygen Monitor Pulse Oximeter Supplier

CE approved digital color OLED fingertip pulse oximeter spo2 ogical analysis equipment pulse oximeter in medcial

Type :Blood Testing Equipments, Blood Testing finger pulseoximeter Model Number:MSLXY35Instrument classification:Class II Color: blue, green, pink,blackProduct name:digital fingertip pulse oximeter Display type:OLEDParameter:SPO2, PRCertification:CE,ISOPower Requirement:2 x AAA 1.5V alkaline battery Supply type:Manufacturer

Fingertip Pulse Oximeter: Specification

DisplayOLED two color display, waveform displaySpO2
Measurement range: 70~99%
Resolution: ±1%
Accuracy: ±2% (70%~99%), unspecified (<70%)Pulse rate
Measurement range: 30~240 bpm
Resolution: ±1%
Accuracy: ±2bpm or ±2% (select larger)
Low Perfusion ≤0.4%Power
1.5V (AAA size)
alkaline battery x 2(Not included )
Supply voltage: 2.6~3.6V Working current≤30mAAutomatic power-offAutomatically power off when no signal
in the oximeter for more than 8 secondsDimension and weight58*35.4*31.5mm
54g(without batteries)PI IndexMeasurement scope: 0-20%

Feastures
-The pulse oximeter is a noninvasive, handheld patient pulse oximeter.
-It operates only on Common 1.5V AA alkaline or rechargeable battery power.
-It is compact, small, light, and easy for learning and handling.
-It is suitable for pulse oximetering adult, pediatric, infant and neonate patients.
-It is widely used in the hospital's operation room, ICU, clinic section office, outpatient department, sickroom, emergency treatment, and the recovery and health care organizations, or in the family nursing and in the process of transporting patients. It can also apply to animals selectively.
-Parameters measured by the pulse oximeter include: arterial oxygen saturation (SpO2), pulse rate (PR), pulse strength.
-The pulse oximeter measures these parameters through a SpO2 sensor and displays them on the LED screen after certain further processing.
-The pulse oximeter is operated and controlled by the buttons on the front panel.
-It adopts LED in displaying measurements and in supplementary status indication.