China Ceiling Occupancy Sensor

1) Power source:220~240V/AC;100~130V/AC

2) Power frequency:50HZ/60HZ

3) Detection range:3~10mmax(<22°C)

4) Rated load:1200W(220~240V/AC);600W(110~130V/AC)

5) Time setting:min:5sec~10sec Max: 6min~12±1min

6) Detection angle:360° (ceiling installation)

7) Ambient light:<20lux~>2000lux

8) Working temperature: -10~+40°C

9) Working humidity:<95%RH

10) Installation height:2.5~3.5m

11) Power consumption: working 0.45W (static 0.1W)

12) Sense motion speed:0.6~1.5m/s

How to set KA-S03B:

1) SENS: Adjust detection range. Turn clockwise to increase it and turn anti-clockwise to decrease it. It is 1m when turn to mini, and it is 8m when turn to max.

2) TIME: Adjust time setting of load work. Turn clockwise to increase it and turn anti-clockwise to decrease it. The time setting is about 8±3min when turn to max. It is in impulse mode when turn to mini. In impulse mode if you want turn to short time mode turn anti-clockwise a little when LED blink three times is ok.

3) LUX: Adjust working light. Turn clockwise to increase it and turn anti-clockwise to decrease it. When turn to mini, it will only work below the light-control about 10LUX, when turn to max, it can work any light-control.
KA-S03B Actual Photo: