China Centrifugal Milk Spray Drying Machine

Milk Spray Drying Machine
1.Simple Introduction:
Spray drying is the widest used technology in the liquid shaping technology and in the drying industry. Centrifugal Atomizing (Spray) Drying Equipment is most suitable for producing powder, particles or solid block products from materials of solution, emulsion, soliquoid and pumpable paste states. Therefore, spray drying is useful to create the desired particle size, residual water contents, the stocking density, and the particle shape needed to meet precise standards
2.Working principle:
The air is through the filter and heater, the air distributor which enters the dedicator top, the hot air takes the form of spiral and enters the dedicator evenly. The material liquid , from the material liquid trough from the at odds with the community or the leadership atomizer for the dedicator top of pump sending through the filter, make the material liquid gush out into an extremely small calorific drop, material liquid and hot air flow and keep in touch, moisture evaporate rapidly, within extremely short time dry to become finished product, finished product discharge by dry tower bottom and whirlwind separator, the waste gas is discharged by the air blower.
Main technical Data

ItemSpecificationWater Evaporation5kg/hMethod of AtomizingHigh Speed Centrifugal Atomizer (mechanical drive or stepless frequency speed regulation is available)Revolution of atomizer(rpm)15500Diameter of Atomizing disc (mm)60Dried Powder Recovery Rate (%)Around≥95Length of Covered Area(m)1.6Width of Covered Area(m)1.1Height of Tower Body(m)2.2Hoisting height of Nozzle(m)1.8Air input Temp160~200ºCAir output Temp70~90ºCTower Height1750mmInduce Fan Power3 kwAir Blower Fan Power2 kwFeeding pump power1 kwNebulizer Power2 kwVibrator air volume1CBM/minE-Heating Power12 kw