China Chain Bucket Elevator SBucket Elevator for Cement Plant

Chain Bucket Elevator, Sand Bucket Elevator for Cement Plant
Bucket elevator with large throughput, great enhancing -height, stable and reliable operation, long life and other significant advantages. Hybrid-type or gravity discharge, earth-type loading. Applicable to transport packing density of less than 1.5t/m3, easy to take out the powder, granular, small block of low-mill cut materials, such as coal, cement, gravel, sand, fertilizer, food and so on. Delivery temperature of the material does not exceed 250° C.
Structure:
1. Buckets to contain the material;
2. A belt to carry the buckets and transmit the pull;
3. Means to drive the belt;
4. Accessories for loading the buckets or picking up the material, for receiving the discharged material, for maintaining the belt tension and for enclosing and protecting the elevator.
Working Principle of Bucket Elevators:
A centrifugal discharge elevator may be vertical or inclined. Vertical elevators depend entirely on the action of centrifugal force to get the material into the discharge chute and must be run at speeds relatively high. Inclined elevators with buckets spaced apart or set close together may have the discharge chute set partly under the head pulley. Since they don't depend entirely on the centrifugal force to put the material into the chute, the speed may be relatively lower.
Nearly all centrifugal discharge elevators have spaced buckets with rounded bottoms. They pick up their load from a boot, a pit, or a pile of material at the foot pulley.
The buckets can be also triangular in cross section and set close to on the belt with little or no clearance between them. This is a continuous bucket elevator. Its main use is to carry difficult materials at slow speed.
Early bucket elevators used a flat chain with small, steel buckets attached every few inches. Current construction uses a rubber belt with plastic buckets. Pulleys several feet in diameter are used at the top and bottom. The top pulley is driven by an electric motor.
The bucket elevator is the enabling technology that permitted the construction of grain elevators. A diverter at the top of the elevator
allows the grain to be sent to the chosen bin

ModelTypeTransmission capacity(m3/h)HopperTransmission Shaft Rev(r/min)Largest Block(mm)Altitude(m)Deep hopperLight bucketVolume(L)Distance (mm)Bucket Width(mm)Speed
(r/min)Deep
hopperLight bucketD160adhesive tape type83.11.10.653001601.047.5254.82-30.02D250adhesive tape type21.611.83.22.64002501.2547.5354.48-30.08D350adhesive tape type42257.875003501.2537.5454.3-30.3D450adhesive tape type69.6481514.56404501.2537.5554.54-34HL160centrifugal chain type62.21.10.654001600.8747.5254.84-30.02HL250centrifugal chain type146.83.22.65002500.8747.5354.84-30.08HL300centrifugal chain type28165.24.45003001.2537.5404.66-30.16HL400centrifugal chain type47.23010.5106004001.2537.5504.52-30.32

Our service: Training & Service
Pre-sale services: enthusiasm
We provide you with the prophase plan, process flow design and manufacturer equipment,
according to your special demand.
Sale services: servant
Send technicians to the jobsite for guiding the installation and adjustment, training operators
and finishing the check and accept together with you.
After-sale services: faithfulness
To establish long term friendship, we will regularly pay return visit to customers.
In addition, we provide one-year warrantee to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.
Welcome to visit our company and workshop, we sincerely look forward to cooperating with you. We will provide you with the most suitable products with the reasonable price.