China Chain Conveyor Spiral for Box Lifting Bag Spiral Conveyor Elevator

Chain Conveyor Spiral for Box Lifting

This innovative belt enables a low rolling friction operation without any sliding movements or wear strips on the spiral conveyors.The belt is pulled by a heavy duty steel roller chain and the slats are supported by precision steel roller bearings which ride on a polyurethane surface.This arrangement effectively takes up the side forces created by a tight radius and at the same time increases the load carrying capacity.This enables the spiral conveyors to start and stop fully loaded and facilitates high speed,low noise and long life.

Technical data

Size for example: φ2200*W400*H3000mm

1,Middle column profile:aluminum material,side plate SUS304 or carbon steel material

2,Transportation: proprietary slat belt,width=406mm

3,Spiral angle:6.9 degree

4,Speed:0-30m/min,adjustable

5,Conveying width=450mm

6,Conveying direction:Up or down

7,Motor:SEW or Simenz-1.5KW

Sprial conveyor application

Widely used in various industries,such as building materials,chemical,power,metallurgy,food and other industries,suitable for horizontal or inclined transport powder,granular and small pieces of materials such as ash,slag,cartons,.The spiral machine is not suitable for conveying perishable,viscous,agglomerated materials.

Spiral conveyor features

Small Footprint:

The proprietary low friction chain slat belt allow Ryson Spiral Conveyors to operate within a small footprint, saving valuable floor space. See the chart below for specific dimensions on our most popular models.

Horizontal Entry and Exit:

All Ryson Spirals are designed with a horizontal section at the in and outfeed. This assures a safe and reliable transition between the spiral and adjoining conveyors without product damage and undue wear.

Built in Protection:

All Ryson Spiral Conveyors are equipped with an automatic chain tensioning device and built-in overload protection as a standard.

One Drive:

only one drive motor is required, resulting in substantial savings in energy, controls and systems integration.

Easy to Install:

Most Spiral Conveyors are shipped in one piece, pre-assembled and pre-tested, drastically reducing time and cost of installation.

Low Noise:

Our proprietary chain slat belt assures a low noise operation, less than 75 db in most cases.

Advantage

1,Middle pillar:Splicing aluminum material
2,High strength spiral chain,effective width=406mm,carbon steel bottom chain
3,Motor:1.5KW*380V*50HZ,China local famous brand or SEW or Siemenz
4,Speed: 10-20m/min,with inverter to change speed
5,Side plate:SUS201*2T or SUS304*2T bending plate
6,Support base:80*80 carbon steel square tube,painting processing
7,Chain board center spiral angle:10.7 degree

There are six options for case or carton inlet and outlet direction,there will always be one configuration suitable for your layout!
Company Introduction
Under the care and concern from people of all circle,we have always been advancingsteadily and expanding gradually.To further expand company business and provide better service for customers,we hope more and more insiders and outsiders to communicate with us.Let's become good partners during operation,winning mutual benefit and complementing our advantages
By insisting on the concept of "being professional and pragmatic ,high quality and high efficiency",regarding safe production as the guide ,basing ourselves on quality control,bearing the responsibility of environmental protection and occupational health.we strive to foster core competitiveness and create a brand in the industry------Suzhou artisan machinery co.,LTD
Successful Stories
FAQ
1.How to confirm the type?
A: There are many methods for us to confirm the type:
1). tell us the specifications data.
2).tell us your requirements as more as possible, and our engineers will give you the best suggestion and design the most suitable product.
3). send us the photos with size.
4). send us a small piece sample.
2. What is the payment terms?
A: We prefer T/T, but for some countries, we will also accept trade assurance order.
3. When will delivery the goods?
A: Usually, we will deliver the goods within 15 working days. And if the quantity is big, it will take about 20-30 working days.
4. How long will the product be used?
A: The time is different differ the usage and factory. But we can confirm and make sure that our product can be used longer than any other one in China.
5. Is the package strong enough for the long transportation?
A: Of course it is.
By sea, we will pack every piece into wooden/ polywood box.
By air, we will pack it by strong water-proof bag.
Contact us