Chassis Pretreatment E-coat Paint Line:
Indoor environment requirement for coating:
1. Room temperature: RT
2. Air speed: 0.3~0.6 m/s
3. Illumination: More than 500 Lx
4. Noise: Less than 85 dB
Coating line water drying:
No.ItemTechnical parameter1Structure typeInsert board assembly bridge type hot air circulation oven2Inner sizeAccording to design requirement3Drying temperature110~150ºC4Drying time10~15 min5Fixed point temperature difference in drying tunnel±5ºC6Heating up time<40 min7Installed power100000 Kcal8Energy0 # diesel or electric9Circulation air volume7000 m3/h10Waste gas discharge systemEquipped with regulating valve
Electrophoresis coating system:
Cathodic epoxy electro coating is highly corrosion resistant. A thin dry film thickness can withstand long time salt spray test.
Electrocoating has the ability to give very even coating with variances ranging to only 1-2 microns. E-coating assures the uniform of coating.
Coating line design parameter: