China Cl-500pgc1 Powder Gun Coating System

CL-500PGC1 Powder Gun Coating System
Powder Coating Control Unit # PGC1 with a PG1 Gun and cable
PGC1 POWDER COATING GUN ConTROL FOR GUNS PG1, PG 1-A, & PG 2-A

Power range
220vFrequency 50/60HZ Temperature range in use -10+50
Gun weight:500gRated output voltage 24VDCInput voltage - 200kv
Maximum output current180Ua(max)Maximum output voltage 0-100KV ( adjustable) Maximum powder injection 600g/minPolaritynegative (-) Maximum input-air pressure8kg/cm Optimum input-air pressure 6kg/cm

Electrical data
Technical data for the PGC 1 Powder Gun Control
Single-phase AC
Selectable voltage: 100 V, 110 V, 120 V, 200 V, 230 V or 240 V
Tolerance (at 230 V): ± 10%, based on 230 V (198 V-253 V)
Voltage selection is made on the inside of the electrical unit by resoldering the tag of the transformer.
The value of the fuse for 100, 110, and 120 V is 1, 0 AT and for the higher voltages is 0, 5 AT.
The equipment is delivered for operation at 230V from the factory.
Frequency: 50/60 Hz
Connected load: 50 VA
Rated output voltage (to gun): 10 V
Rated output current (to gun): 1.2 VA
Type of protection: IP 54
Temperature range: +10o C to +40o C (+50o F to +104o F)
Specification of the external control signal:
Nominal voltage: 24 VDC
High-Voltage - On: 0...2, 5 V
High Voltage - Off: 16...30 V (max. 35 V for t <100 ms)
Input current: 12 mA (typically at 24 V)
Pics