China Cleaning Machine for Flat Die

Do you still feel annoyed and depressed by the severe blocked flat die??
Do you sitll use the tranditional and inefficiency way to clean such blocked flat die ?
Oil immersion 12-24 hours or blowing with compression air ?
Now our latest cleaning machine for flat dies will help you caml down !!

1. The cleaning machine for flat die was designed and manufactured by Sichuan Meishan ShanBao Machinery Mould Co., Ltd., which has independent intellectual property rights, it belongs to the pioneer product. The China patent number is 201721054780.3.
2. The function of the equipment.
It is mainly used to clean the flat die' hole quickly and automatically
that is blocked by fiber and others when produce puffed feed.
3. The main parameters of the equipment are as follows:
Outside size: length * height * width =1200mm*970mm*1300mm.
The weight: 190 kg.
Power input: AC380V+N
Air input:dry compressed air 0.4-0.6MPa
Media:water
Control mode: automatics.
Bore diameter could be handled:bore diameter≥0.5mm Time needed:5-15mins(diameter 0.5-1mm);5mins (diameter >1mm)
Passed through hole rate:85-90%(diameter 0.5-1mm); 95%-100% (diameter>1mm)
4. Introduction of equipment advantages: Increase production efficiency: it only takes 5-10 minutes instead of the original 1-3 hours by manual processing. Reduce labor intensity: automatic completion without manual. It can prevent the destroying of the wear-resisting layer of the hole resulted by the expansion force from manual cleaning .