China Coaxial Adapter for The High Digital Network Monitoring System

With the development of digital information age, traditional analog video monitoring camera will be replaced by the HD digital net camera, but in the procedure of traditional monitoring system improvement, re-wiring is a difficult problem, including the difficulty of execution, environment damage, time limit of the project, manual cost etc.. WD-C200M-BNC makes use of the existing video cable to transfer the network signals, can upgrade the traditional monitoring system without any wiring and manual cost quickly, just plug and play without setting. It can be used matching with WD-C500M-BNC.

Model

WD-C200M-BNC

Interface

1*10/100base-TX self-adaptation RJ45, 1*BNC,1*external power

LED display light

PLC, POWER, ETH

Frequency band

2-28MHz

Protocol

HomePlug AV, IEEE 802.3, IEEE 802.3u

Security

128-bit AES

Transmission rate

200Mbps

Modulation

OFDM

Transfer distance

1000m

Power consumption

≤5W

O/S

Windows 98/ME/NT/2003/7,Windows XP Home/Pro,Mac OSX ,Linux

Size

162*90*26mm(L*W*H)

Weight

0.5kg

Operating environment

Working temperature:0ºC-70ºC

Working humidity:10%-85% no condense

Certification

FCC,CE,ROHS

Working voltage

DC 12V, 1A

1,Replace the analog camera to the net camera(IPCAM) or add a video server.
2,Add a WD-C200M-BNC coaxial cable Ethernet bridge behind the side of IPCAM or video server.
3,link a WD-C200M-BNC local side coaxial Ethernet bridge at the other side of the coaxial cable after being connected with the coaxial cable.
The traditional analog monitoring system is upgraded into the high digital network monitoring system through above operations.