China Coaxial Ethernet Adapter for The High Digital Network Monitoring System switch

With the development of digital information age, traditional analog video monitoring camera will be replaced by the HD digital net camera, but in the procedure of traditional monitoring system improvement, re-wiring is a difficult problem, including the difficulty of execution, environment damage, time limit of the project, manual cost etc.. WD-V101M-BNC makes use of the existing video cable to transfer the network signals, can upgrade the traditional monitoring system without any wiring and manual cost quickly, just plug and play without setting.

Model

WD-V101M-BNC

Interface

1*10/100base-TX self-adaptaion RJ45, 1*BNC,1*external power

LED display light

ETH,DSL,PWR

Protocol

ITU-T G.993.2

Modulation

DMT

Power consumption

≤5W

O/S

Windows 98/ME/NT/2003/7,Windows XP Home/Pro,Mac OSX ,Linux

Size

162X90x26(mm)

Operating environment

Working temperatre:-40ºC-80ºC

Working humidity:10%-85% no condense

Transmission distance

1.5KM

Transmission rate

300Mbps

Frequency band

25K-30MHz

Certification

FCC,CE,ROHS

Weight

0.4kg

Working voltage

DC12V

1,Replace the analog camera to the net camera(IPCAM) or add a video server.
2,Add a WD-V101M-BNC video cable Ethernet bridge behind the side of IPCAM or video server.
3,link a WD-V208M-BNC local side coaxial Ethernet bridge at the other side of the coaxial cable after being connected with the coaxial cable.
The traditional analog monitoring system is upgraded into the high digital network monitoring system through above operations.