Multi Effect Evaporator
Introduction:
The multi effect evaporator uses the falling film evaporation principle to heat and boil the dilute solution to vaporize part of the water, so as to achieve the purpose of concentrating the solution. The unit adopts continuous production process.
Features:
The unit has a large heat transfer coefficient, and the required heat transfer temperature difference is small. According to the nature of the evaporated material and the evaporation target, it can be combined into double effect, three effect, four effect and five effect evaporation system. It can also use the waste steam at the top of the tube bundle or disc dryer and other low calorific value heat sources (such as condensate steam) as the heat source of the evaporator to become the waste heat evaporator, which can be greatly reduced Reduce the amount of raw steam to achieve the maximum energy saving effect. When there is sufficient supply of waste heat steam, the raw steam can not be used at all, and remarkable economic benefits can be achieved.
Specification:
ParameterJMZ-3.0JMZ-4.5JMZ-6.0JMZ-9.0JMZ-12.0JMZ-15JMZ-20JMZ-24JMZ-30JMZ-50Evaporation capacity (kg/hr)3000450060009000120001500020000240003000050000Raw steam consumption (kg/hr)9001350180027003600450045007200900015000