China Cold Room Freezer Room with Refrigeration Condensing Unit

Cold Room/ Freezer Room with Refrigeration Condensing Unit

Cold room with refrigeration condensing unit is a chamber with adjusted temperature, if you store meat and seafoods, temperature will be around -20 degrees celsius. With freezer room, fruit and vegetables can be kept fresh for long time.
PU Panel

Our mould can produce 50mm , 75mm , 100mm , 120mm, 150mm , 200mm thickness panel.

For deep freezer cold room , we suggest using 120mm or 150mm thickness . For cool rooms, we suggest using 100mm. PU panel sandwich use PU high pressure foaming. Taking metal materials like color steel sheet, stainless steel plate or some other materials as surface. Generally polyurethane refrigeratory are combined refrigeratory , assembled by polyurethane panels , it can be assembled in different width and height . We have panels width take 960mm or 1000mm as module , nonstandard size can be customzed separareky. Internal pre-embedded cam-lock , scientific design, compact installation,strong sealing, easy construction.

Cold Room/ Freezer Room Panel
Condensing unit

Compressor is the most important equipment in refrigeration equipment (It often referred to as the host refrigeration equipment) . We mainly offer original new Bitzer and copeland brand compressor.

Compressor compresses the lower pressure steam into higher pressure steam, which reduces the volume of steam and raises the pressure. The compressor sucks in the lower-pressure working fluid vapor from the evaporator to increase the pressure and send it to the condenser. The condenser condenses into a liquid with higher pressure. After the throttle is throttled, it becomes a liquid with a lower pressure. Low liquid is sent to the evaporator, absorbs heat in the evaporator
and evaporates into low-pressure steam, and is sent to the inlet of the compressor, thereby completing the refrigeration cycle.

We provide specially temperature refrigeration equipment for industrial freezer rooms. Our engineer use professional software to calculate the design proposal then choose the most suitable condensing unit and evaporator according to customer's requirements. So it can save customers' using costs while meeting customers' refrigeration demand.

Evaporator

Production of High Temperature Unit Cooler. This program applies to production models of high temperature unit cooler, as defined below and meet the following criteria:

Use refrigerant R404a for TES and/or liquid overfeed coils;

Aluminum fins; Single vertical coil;Horizontal only air flow direction (the air flows to or from the inlet face of the coil from or to the fan inlet, with no change in direction);
and Axial fans only.

A factory made assembly including means for forced air circulation and elements by which heat is transferred from air to refrigerant without any element external to the cooler imposing air resistance. These may also be referred to as Air Cooler, Cooling Units, Air Units or Evaporators. Unit Coolers utilize a volatile refrigerant fed by either direct expansion or liquid overfeed with ratings based on wet or dry conditions.

Customer case

onlyKem Technology had been specializing in delivering turn key Cold room with refrigeration condensing unit to worldwide customers. In recent years, we have been keeping on investing in technological innovation, integrated cold room design and modular customization, remote monitor and control system. All the safe and efficient operation of cold rooms in milk factory, slaughter factory, supermarkets, food shops or restaurants can be satisfied with our customized solutions by our professional staffs and solid technologies.

We had provided many types of effective and states of the art freezer rooms to over 45 countries. Our customers are from Swiss, Sweden, Australia, USA, Canada, New Zealand, Japan, Pakistan, Spain, India, Malaysia, Singapore, Malaysia, Philippines, South Africa, Argentina, Indonesia, Kenya, Algeria, Ghana, Guyana, Mongolia, Chile, Peru, Dubai, Poland, Mexico, Brazil, Lebanon, Thailand, Kazakhstan, Turkmenistan, Bangladesh, Colombia, Bahrain, etc.

Certifications

Our workshop is the professional workshop to manufacture unit cooler, condensing unit, cold room door or PU panels. As the leading cold room designer and manufacturer, onlykem has its own 8,000 square meters state of art manufacturing factory. Depending on the supply chain and the manufacturing competitive advantages, some factories are wholly-owned subsidiary and some are our joint ventures. They are located in different cities and integrated with each other to form the whole cold room solution with high quality and competitive cost products. In recent years, we had invested more than 1,000,000 dollars into our modern manufacturing factory to improve the basic production facilities , working conditions, employee salary and welfare, technical and teamwork training, etc. Welcome to visit our workshop for Medical Cold Room Cold Storage Industry
Attending Exhibitions
FAQ:

1. What's the payment details?

Deposit before production, and balance payment before shipment.
2. What's the delivery time?
7-15 days.
3. What about the warranty for the doors?
We provide 12 months warranty for all doors and accessories.When the product quality appear.
4. Do you provide OEM Service?
Yes. OEM & ODM Service is ok for us.
5. What's the MOQ?
We accept 1 set as sample order, but we prefer give your more discount.
6. How about the service?
A:Patient Pre-sale service: Offter you the professional advice about the different door functions , and We are very happy to let you know all aboout our product,
B Strict packing standard and Professional and efficient export process.
C:Patient After-sale service:We can do customized dimension according to customers' requirements.
We have access to all the leading Cold Room refrigerators brands and can offer independent advice and recommend right equipment to meet your business requirements.