China Colo-660V Manual Powder Coating Equipment for Metallic Spray

Vibrating Manual Powder Coating Equipment (Colo-660V)
Box feed system colo-660V
If your production requires frequent and quick color changes, then we would recommend the Colo-660V, which is designed to use the powder manufacturer's original carton. Highest flexibility, Minimal color change times, For direct transport from the original powder carton, Complete emptying of the powder box thanks to the tilted vibrating base, Integrated Fluidisation
Technical Data
1. Electronic control:
Input voltage: 220-240V 50Hz
Input power: 40VA
Output voltage: 0-50VAC
Output frequency: about 17kHz
Output current: 0-0.8A
Pneumatic control:
Input air pressure: 8bar
Output air pressure: 0-6bar
The air source quality: Moisture capacity less than
15g/NM3 oil content less than 0.1mg/NM3
Powder spraying pistol:
Input voltage: 0-50VAC
Input current: 0-0.8A
Output voltage: 0-100KV. DC
Output current: 0-0.15MA
Powder output: about 500g/min (3.5bar output air pressure)

660 Series Features and Specifications:

0-100 Digital Adjustable KV
Fully Adjustable Amperage
Pulse Power Technology for beating Faraday Cage Effect.
Able to cut Pulse Power on and off
With three setting program,for flat shape workpiece,complicated shape workpiece,recoating,easy for operation.
Fully Adjustable Air for Pump on Pressure, Dosage and Nozzle Rinsing Air.
Comes with Full Array of Nozzle Assortment.
Field Tested and Proven to operate in the toughest environments.
Comes with different array of delivery systems:

Easy for color change

Because this system was designed with the Pulse Power Built in its
Electronics it is specially balanced for the maximum spray capability with
the Smoothest Finish Possible.

Manual coating equipment Function description

the powder gun through the powder hose . The powder is electrostatically

charged at the nozzle of the gun. In addition, an electrostatic field is

created between the gun nozzle and the grounded object. The charged

powder spray remains adhered to the surface of the object.

The powder is fluidized by air forced through a porous plastic plate from

below. The powder acquires, thereby, fluid-like characteristics.

The conveying air, supplementary air, and rinsing air are set on the control

Unit

Include

A control unit power supply cable

- A air filter

- A air pressure regulator

- A plug-in injector

- An manual powder gun with gun cable, powder

hose, rinsing air hose and standard nozzle set.

- Pneumatic hoses for conveying air (red), supplementary

air (black) and fluidizing air (black)

powder hose

Ground wire

Packing Dimensions

Length: 84cm

Width: 52cm

Height: 68 cm

Weight: 37 kgs.