China Compact Nano Agitator Bead Mill for for Wet Grinding Milling of Solid Powders

Description of the nano agitator bead mill:
The MSK-SFM-ABM300-LD is a compact agitator bead mill for wet grinding & milling of solid powders into nanometer range (2 um - 200 nm) particles. It offers highly efficient milling with narrow size distribution of milled particles
Specification of the nano agitator bead mill:

Features
Highly efficient milling system that combines bead milling and centrifugal separationWear and corrosion resistant design for metal free processing with milling chamber and rotor made of ceramicSelf circulation with a closed system for circulation and multi-pass milling operationHigh purity zirconia milling balls are included for immediate useInput Power220 VAC, 50 Hz370 W powerMilling Operations
Motor speed: 600 - 3000 rpm programmableMilling chamber capacity: 300 mLMilling chamber material: Aluminum oxideMilling rotor design: Peg grinding system with small length/diameter ratioMilling rotor material: ZirconiaMilling media size: 0.1 - 0.8 mm0.75 kg 0.3-0.4 mm high purity milling media is included, which fills up to 70% of the chamberMilling Media
Various sized zirconia milling balls are available to order at MTI. Click the picture below to orderSelf CirculationSelf circulation with a closed system for circulation and multi-pass milling operationMaterial input pressure: Monitored by a pressure gauge (0 - 0.2 MPa full range)Material output temperature: Measured by a temperature meter (0 - 100 °C full range)Separation filter net material: Stainless steel 304Separation filter net pore size: 0.1 - 0.15 mmCooling
Cooling water operating temperature: 8 - 12 °CCooling water input pressure: 0.1 MPaDigital temperature controlled water chiller with 16 L/min flow rate (See left photo) can be ordered at MTI at extra costSize480 mm L x 400 mm W x 550 mm HNet Weight50 kgWarrantyOne year limited warranty with lifetime supportOperation InstructionsComing SoonApplication NotesAlways use the equipment on a level & stable surface for best performance and maximum safetyIf liquid is spilled on the unit, first disconnect unit from external power and then clean the unit with clothThe equipment is NOT intended to use for dry milling of powders! To avoid powder clumps and achieve best milling results, 1) sieve the powder prior to milling, 2) mix milling media of different sizes and do the milling