Compatible Spo2 Sensor for Omni Infinium Omni II with 5pin40degree, 10FT
Connector Guide: 5pin40degree Male
Compatible with: Infinium OmniOne, Infinium Omni II, Infinium Infitron and other Infinium monitors that require a 5-pin connector.
Technical Specifications:
LEDRed660nm normalLED Wavelength660nm/905nmText RangeOxygen Saturation(%SpO2)0% to 100%Pulse Rate(bpm)30 to 245AccuracySpO2±1%(90~100%)±2%(80~90%)±3%(below 70%)Pulse Rate±2bpm(30-250bpm)Storage and Transport Environment-10ºC~+40ºCOperating Temperature±5ºC~+40ºCOperating/Storage/Transportation Humidity0%-80%Hyperbaric Pressure86kPa-106kPa
All type sensors:
P/NDescriptionInstrument ConnectorMPS134A Omni adult finger clip spo2 sensor,10ft
MPS134BOmni adult soft tip spo2 sensor,10ftMPS134COmni pediatric finger clip spo2 sensor,10ftMPS134DOmni pediatric soft tip spo2 sensor,10ftMPS134EOmni neonate wrap spo2 sensor,10ftMPS134FOmni adult ear clip Spo2 sensor.10ftMPS134GOmni animal tongue Spo2 sensor,10ftMPS134HOmni Multi-site Y type spo2 sensor,10ftMPS134IOmni Infant soft tip spo2 sensor, 10ftMPS134JOmni Multi-site Y type with foam spo2 sensor,10ftMPS134KOmni Multi-site clip spo2 sensor,10ft
What is spo2?
SpO2 is a measurement of the amount of oxygen attached to the haemoglobin cell in the circulatory system. Put simpler, it is the amount of oxygen being carried by the red blood cell in the blood. SpO2 is given in as a percentage, normal is around 96%. The "S" stands for saturation.
Very simply: Spo2 Goes up and down according to how well a person is respiring (breathing) and how well the blood is being pumped around the body, however, like most things in physiology it is more complicated than this.
This information is provided as an aid to understanding medical lingo and in no way replaces proper training.
How to test a Spo2 sensor without those expensive equipment(like Spo2 Analyzers or similar)?
You can use a simple multimeter to check the pins of Spo2 sensors' connector, to get the configuration of it,
In it, two pins are for detector and 3 for I.R and L.E.D, You put your meter of resistance option and check, on L.E.D checking it also blink the red light, on the others, it will show only 0.666, something like that.
Cleaning step:
1, Turn off the oximeter before cleaning.
2, Wipe exposed surfaces with a soft cloth or a pad moistened with a mild detergent solution or medical alcohol (70% isopropyl alcohol solution)
3, Clean inside of the elastic thimble and two optical elements with a cotton swab or equivalent moistened with a mild detergent solution or medical alcohol (70% isopropyl alcohol solution), Ensure without dirt or blood.
Attention:
1, Keep the sensor dry before using. The rubber inside of the Spo2 sensor belongs to medical rubber, which has no toxin and no harmful to the skin of human being. Spo2 Sensors can be cleaned and disinfected with same solutions.
2, Replace the batteries timely when battery indication is low. Please follow the law of the local government to deal with used battery.
Transportation Methods:
warranty:
1, Reusable spo2 sensors are carried 12 months warranty to repair for free due to the quality problems since ex-factory;
2, ECG cable and leadwires, spo2 adapter cable, EKG cable are carried 6 months for free (excluding disposable spo2 sensor), but including the misuse, negligence or accidents causing from the buyer.
Return:
For all warranty return items, prior authorization to return merchandise must be obtained by contacting SZMEDPLUS. If the items are not covered under warranty, customer is responsible for all shipping fee 25% restocking fee.
Contact information:
Company name: ShenZhen Medplus
Contact Person:Jenie Wei