China Complete Wood Pellet Production Line Wood Pellet Machine

10000-40000tons/year complete wood pellet production line

Pelletizing is the process of making waste materials into solid fuel. The objects are used for
Burning purposes.
Depending on the different input material, we fit out the suitable Crushing
Machines. If the raw material is the Straw Baler, we developed the series Baler Crusher
Adopting the foreign advanced technology.
If the raw material is big logs with diameter less 300mm or big timber cutter, our is your best choices;
While is widely used to crush each kind of straw, wood chip,
Tree branch, bark and leftover bits from agricultural wastes. The best moisture content in
The Crushing Process is less 20%, and the thickness of the wood chip is less 5mm.
The best moisture content to pelletizing is about 14-16%. Our new Air-Current Rotary Dryer is made up of Burning Stove and Main Rotary Dryer, which can
Realize to reduce the moisture from 50% to 10%, and save about 30% energy consumption
Comparing the old Rotary Dryer.
Our burning stove is fueled by coal and wood material, which can save electricity consumption
Largely.
Wood Pellet machine is the most important equipment, which have the following features:
(1). The lubrication system for wood pellet mill adopts the tracing and inspecting system
Controlled by the microcomputer. When the temperature of the bearing is over the normal
Temperature, the microcomputer will start the round closed Auto-Lubrication System to
Lubricate the bearings, which complete solved the trouble of lubricating roller depending
On the operation experience.
The Lubrication System is made up of the tracing and inspecting system controlled by the
Microcomputer, auto-lubricating system on time and compelled lubricating system by hand.
(2). Driving Gear adopts the high precision gear transmission structure. The wear bearing
Is made from China Biggest Bearing Manufacturer
According to our special requests. The ring die adopts the hoop fastening method, which is
Increasing the speed of discharge comparing with the past bolt fastening method.
As a result, the capacity is 10-15% higher than the belt transmission structure.
(3). As per the ring die and roller of the wood pellet mill, we have the fine machining with the
Alloyed steel, such as 20 CrMnTi and 40Cr; And stainless steel, such as 4 Cr13 and 3 Cr13.
And our heating treatment is also different from the other domestic manufacturer,
Our carburizing treatment make the depth of hard facing to 2mm, which improve the anti-abrasion of the ring die and roller more than 10 times, it can save the production cost heavily.
After the pelletizing process, the temperature of the wood pellet is about 60-80 degree, and the moisture content of the wood pellet is about 15%, so we need use Cooler
To reduce about 3-4% moisture, such this the wood pellet is easy to store.
But considering the feedback from some foreign clients, the local climate is very humidity;
They hope to cool the wood pellet with moisture 7-8%. In order to satisfy the different need
From different clients, we develop one kind of new Stabilizer Combined Cooler.
After cooling, the wood pellet will not directly enter into the fuel process,
Avoiding the wood pellet affected with damp.
The packing process is necessary. In this process, we assemble our domestic best Semi-Auto Packing Machine to you.
We also can match the Tons-Packing Machine for you.

ItemMolding rateConstant working timeNoiseElectricity
consumption Rotation speedCapacity of ring dieLB-420MX>95%>20hours≤88db85kw/ton960r/min800-1000tonsLB-508MX>95%>20hours≤90db80kw/ton960r/min1000-1200tons

Model Main motor
(KW)Capacity
of wood pellet
(kg/h) dimension(mm)NO of rollerDiameter
(mm)Diameter of
ring die
(mm)weight
(ton)LB-420MX90/110800-10003300x1200x39432φ6,8,104203LB-508MX132/1601500-2000 3450x1470x4445 2φ6,8,10 5084.5