China Composite Materials Dual Over Temperature Protection Power Saving Drying Oven Curing Oven

1,Name of industrial oven: composite oven
2,Inner size:W1400*H2400*D1350(mm);
3,Dimension:W1900(Excluding electric box)*h2900(Excluding motor)*D1560(mm);
4,Temperature Range:Indoor-200ºC(normal use);
5,Heating rate:Temperature to 200ºC ≈15min
6,Temperature uniformity:±3ºC(no-load test)
7,Protector:PID self-setting, automatic constant temperature, automatic timing, timing alarm power off, over-temperature power off, leakage protection, motor overload protection, control line fuse, no fuse switch and other electrical accessories;
8,Intelligent temperature controller, PID automatic calculation, LED display, and SSR solid-state relay output can be used to accurately control the accuracy of temperature;
9,The inner liner material adopts mirror 304# full stainless steel plate, and the argon arc welding can be fully welded to prevent dust from generating on the machine.High temperature powder paint with 2.0mm cold binding plate for outer frame;
10,The internal cleanliness can reach a level of clean environment;
11,Dual overtemperature protection, more reliable and safe;
12,Design the air duct of the oven according to the product features, with good temperature uniformity;
13,Fast heating time and accurate temperature stability;
14,Domestic first-class thermal insulation and thermal insulation technology, with remarkable sealing effect;
15,Low body shell temperature has little influence on indoor environment temperature;
16,Floor type trolley design or slope type cart design can greatly reduce the labor intensity of personnel;
17,Energy saving, power saving and strong safety performance;
18,Gross power:40KW(380V 50HZ)
Suitable for baking chemical gas and food processing industry to bake goods, substrate stress removal, ink curing, paint film drying, electronics, electrical, communications, electroplating, plastic, metal,composite,chemical, food, printing, pharmaceutical, PC board, powder, immersion, spraying, glass, ceramics, wood building materials...... And so on the precision baking, drying, tempering, preheating, shaping, processing and so on.
Structure of industrial oven
The industrial oven is an internal and external double-layer structure, the shell is an angle steel thin steel plate, and a fiber material is filled between the inner and outer double-layer shells. The fiber material used in the industrial oven is mainly aluminum silicate, and can play the role of heat preservation and form a reliable heat-insulating layer. The industrial oven is equipped with a hot air circulation system and a temperature measurement and control system.
Principle of operation
The temperature is controlled by the connection between the digital display instrument and the temperature sensor. The hot air circulation system is divided into horizontal type and vertical type by using the hot air circulation air supply mode. After accurate calculation, the air source is driven by the air supply motor to send the hot air to the air duct and enter the oven studio through the electric heater, and the air suction duct after use can be used as the air source to reheat, so that the temperature uniformity can be effectively improved. If the box door is switched on and off in use, the air supply circulation system can quickly restore the operating state temperature value.
The principle of an industrial oven
When the industrial oven is working, the operator obtains the temperature value inside the industrial oven through the instrument and the temperature sensor, and operates through the control system. Compared with the ordinary heat dissipation heating method, the hot air circulation heating mode of the industrial oven has better gas flow and can speed up the drying speed of the materials in the industrial oven.
The hot air circulation system of industrial oven is composed of air supply motor, air turbine and electric heater. The air supply motor drives the air turbine to send out cold air. The cold air is heated by electric heating equipment and carries heat energy, and then enters the oven studio through the air duct.
The hot air circulation system of industrial oven is beneficial to improve the uniformity of air temperature. in the process of transporting materials at the door of industrial oven switch box, the temperature value will be affected, and the uniformity of hot air circulation system will be beneficial to restore the temperature value of working state within the maximum speed.
Daily maintenance
1.Clean the surface and inner cavity dust and keep the machine clean and hygienic.
2. Check whether the ammeter current is the same as normal, if anything, notify the repairman to repair.
3. When there is a sudden power outage, turn off the heating switch to prevent automatic start on incoming calls.
4. Check that the fan is running properly and if there is any abnormal sound, if there is an immediate shutdown of the machine and notify the repairman to overhaul.
Monthly maintenance
1.Check the vents for blockage and clean up the dust.
2. Whether the fan is running properly and whether it is reversed or not.
3. The repairman checks whether the current is normal.
4. Check that the temperature controller is accurate. If it is not accurate, please adjust the static compensation or sensor correction value of the temperature controller.
5. Check the heating pipe for damage and aging of the line.
6. Check whether the delay device is accurate and whether the error is allowed.
(1) 4 catalyst drying Chamber equipment is composed of equipment main body, cart, trailer, dehumidification and air intake device, aiming to realize rapid drying of the catalyst.
(2) evenly spread the catalyst particles in the tray, and manually put the tray on the cart, with 8 pallets for each layer of the cart, a total of 8 brackets.
The cart is brought into the furnace by hand through the trailer.Quick drying at the required temperature.After the preliminary drying process,
(3) drying Chamber adopts hot air circulation to dry, which can guarantee the uniformity and stability of temperature field and velocity field in the entire drying process.

Technical Parameters of Industrial OvenTypeCommonCleanFinishing CureExplosion-ProofVacuum Temperature range0-250ºC0-350ºC0-550ºC0-700ºC700ºCTemperature Homogeneity±1ºC±3ºC±5ºC±1.5%ºC Heating Rate<=5ºC/min<=8ºC/min<=10ºC/min10ºC/min Energy TypeelectricalGasSteamAir EnergyOtherHeating ModeElectric Infrared Other ChamberSingleTwinThreeOther Sheathing MaterialCold Drawing Spray-PaintStainless S
teelOther Chamber MaterialStainless S
teel 201Stainless S
teel 304Galvanized SheetOther Heat Insulating MaterialAluminosilicate Rock WoolInsulating Fibre-BoardFirebrickOther Air Transport ModeLeft and RightUp and DownFront and Behind Symmetrical Left and Right Air Motor PositionTopbottomHindsideSidepieceOtherNumber of Explosion-proof DoorsOneTwoOther Manual doorSingle DoorDouble DoorThree DoorsOther Automatic DoorRevolution doorSide Sliding DoorLift doorRoll-Up DoorOtherCart TypeDouble-Deck CartMotor-TrolleyLanding CartAutomatic TrolleyOther Power ControlSSRSCROther Control ModeInstrument ControlHMI ControlNetwork ControlOther Timing ModeManual AutomaticOther Safety Protection FunctionOvertemperature Overload Phase Sequence Earth Leakage ProtectionOtherDetection FunctionTemperatureThicknessFlamePressureOther

Graphic wind circulation:

Single-sided supply air typeDouble-face typeDouble-face blast with explosion-proofThermal rising type



Thermal rising typeThermal radiation typeHot air radiationHot air radiation