China Concrete Mixer

Product Description
JS500 concrete mixer features 1. The mixing machine adopts a double-shaft mixer, and the lining plate and the blade are made of high hardness and wear-resistant alloy material; 2. The shaft end seal adopts a fully automatic sealing and lubrication system to effectively prevent the intrusion of mortar and minimize the use of oil; 3. The reducer is produced by foreign standard technology, with compact structure, high transmission efficiency, low noise, long service life and high mixing quality. 4. The mixing arm and the blade are spirally designed, the stirring is fast and uniform, and the stirring time is short; 5. The tank and the frame are fixed, and the stirring shaft is no longer subject to the pressure of the material and the weight of the tank, thus prolonging the service life of the stirring shaft
Direction for use
First, the inspection content before each use Whether the whole machine is stable. Is the electrical grounding good? Is the pump water supply normal? Stirring and lifting mechanism is operating normally. Second, the operation notes 1, the quality of each added material (including water) should not exceed 1225kg. 2. After the material is discharged, the material can be lifted after the discharge door is closed. 3. The order of feeding to the hopper should be: sand, cement, stone or stone, cement, sand. 4. At the same time as feeding, add water to reduce the mixing time and reduce dust flying. 5. After the hopper is raised, it is strictly forbidden for anyone to stay under the bucket. 6. It is strictly forbidden for the non-local driver to operate the handle and button at will. 7, pay attention to electrical safety, to prevent electrical components, wires from moisture and damage. 8. If the machine is shut down during the mixing process, the manual and manual unloading device should be used to discharge 50% of the material, and then the cause is found. 9. During the operation, no maintenance is allowed. 10. When the warning light is on, the left upper limit switch is disabled and should be replaced or repaired in time. 11. It is forbidden to run the pump in the waterless state, otherwise the mechanical seal will be damaged.
Company information