CM-230 Conductivity meter
This instrument is a panel instrument for on-line monitoring of industrial process conductivity. Range switch over and constant check can both be freely set and adjusted through the operation component on the rear panel; unique signal collecting and processing technology and special thick film circuit are adopted to make measurement accurate and operation stable; there are also other features such as linearized data, automatic temperature compensation, not subject to the length change of cable and maintenance-free. Its an ideal auxiliary instrument of various types of small pure water equipment.
Measurement range:
0~20 0~200 0~2000μS/cm
Accuracy
1.5% (FS)
Stability
±2 x 10-3 (FS) / 24h
Auxiliary electrode
Plastic structure; constant: 1.0cm-1
Temperature compensation component
NTC
Medium temperature
5~50
Thread dimension
1/2pipe thread
Medium pressure
0~0.5Mpa
Cable composition
Quad cable, copper mesh and foil shielded plastic jacket
Cable length
5m or on other agreement (5~30m)
Temperature compensation
Automatic compensation, with 25 as the reference temperature
Display
3.5-bit LCD
Power supply
AC 220V ±10% 50Hz
Power consumption
≤1W
Environment conditions
(1)Temperature: 5~50
(2)Humidity: ≤85%RH
Dimensions
48 x 96 x 100mm (height x width x depth)
Slot dimensions for installation
45 x 91mm (height x width)