China Cone Crusher HP Series

HP series cone crusher
1.Product introduction:
By perfect combination with broken speed, eccentricity (stroke) and cavity type design, HP series cone crusher will provide a higher yield and better product quality, has a more extensive applicability.
1. Compact design, outline size of crusher smaller.
2. High capacity.
3. The broken rate bigger.
4. The cost of running and abrasion is low, the service period is long, convertible, adapt to a variety of different purposes.
5. Qualified fine grained production rate is higher.
By means of combination of optimizing the broken rate and increase the stroke, the HP series cone crusher can provide the largest of cone crusher broken than today. So that circulation loader can be down and the power consumption of per ton final product can be reduced by half. Crushing chamber of higher material density enhances the laminating crushing effect, thus the size and the shape of the grain size of final products more constant, better.
Advanced dynamic cone and fixed cone plate fixing system. When liner need to be replaced or type of crushing cavity need to be changed, the hydraulic motor which used to adjust the discharging mouth will rotary the cone assembly completely then make is withdraw from the adjusting ring thread. Is is greatly simplifies the lining board replacement.
Copper alloy sliding bearing in the dust and high impact vibration environment maintained excellent performance, and more economic than rolling bearing, are more easily to be replaced in the field with conventional tools. HC series cone crusher is easy to remove. All the parts can be removed and assembly from top or side .The active cone and fixed cone assembly could be removed easily.
A new design of the iron release lead to gently release impact, protect the cone crusher from the crushing cavity is broken with foreign body. After the foreign body discharged the mouth back to the original layout. Optional crusher upper cover, the hydraulic finishing equipment and iron release device to be covered by it, to prevent contact with the operator. And at the same time reduce the dust float in the sky, to protect the workplace.

2.Paraqmeter:


Model
Cavity
Discharge Setting
Min.(mm)
Feed Opening
(mm)
Capacity
T/H
Power
(kw)
WeightHPB220F1395 13212M16120 C19190 HPD220M654 C1076 HPB320x13105 22016Z16150 C19215 CC25230 HPD320F625 M854 C1076 HPB420F13110 31526M20200 C25250 EC30300 HPD420F640 M850 C1090 HPB520F16135 40031M22210 C30290 EC38330 HPD520F840 M1056 C1395



(t/h)
Crusher Models and Capacities(t/h) at Close Side SettingHP22055-7560-9080-115110-145130-170140-180150-190160-210180-230200-245 HP32080-95100-130110-140145-185175-220190-240200-260220-280240-320290-380340-440 HP420 115-150130-175180-230220-280240-320260-340280-370310-430350-490400-550450-620HP520 140-170170-220225-290270-350310-400335-430355-450395-530435-600500-680560-760Close
Side
Settings
(mm)6810131619222532384551