China Construction Equipment Construction Machinery German Technology Full Automatic Concrete Block Brick Paver Making Machine

German Technology Automatic Concrete Block Making Machine Equipment
Hawen block making machines are for the manufacture of concrete bricks, blocks and paving. The machines are manufactured to heavy-duty standards to ensure long life, high performance and the manufacture of quality products.
Company Profile:
1. Manufacturer of Block making machine with more than 15 years experience
2. ISO Certified Company
Factory workshop overview
Overview of workshop for block machine
Brief Introduction

HWG-1000 block making machine,using servo motor vibration, it is more energy saving and the response speed is faster. With imported vane pump and hydraulic valve make the equipment run stably and the forming speed faster, which can greatly reduce the cost of brick making.The special vibration and feeding system of this machine can meet the demand of different blocks production for customers,like Hollow block, Solid block,grass-planting paver, curb stones, slope-protect bricks, inter-lock blocks and so on.
Features of HWG-1000 Servo block making machine:
Vibration Table System
Vibration table consists with dynamic table and static table. When vibration starts,dynamic table vibrate,static table remain static,so all the vibration will be focus on the dynamic table;
The vertical vibration made by eccentric vibration shaft will guarantee the quality and density of concrete products.
And vibration table placed on rubber spring could greatly reduce noise around 10~15 decibel and avoid damage to machine;
Hydraulic system
The double vane pump is world famous brand "Albert" to coordinate Japanese "Yuken"Double proportional valve,the vibration amplitude and frequency could be adjusted freely. With proportional valve, the flow and pressure of each movement could be adjusted on touch panel according to actual situation;Through the double proportional valve,different actions can be completed simultaneously so as to save the cycling time thus the production capacity can be greatly improved.
PLC Control system
The PLC in Control system adopts world famous brand Mitsubishi,Touch panel use FLEXEM, Easy operation,low failure ratio, machine running stability and high reliability, convenient for machine maintenance and troubleshooting.
The Sensor Light showing each movement of block making machine shown in the operation panel of PLC control cabinet,easy to monitor each movement of block making machine and easy for maintenance.
With ABB Toggle switch to control the action of block making machine.
Moulds
Hard-wearing mould boxes and tampers are precision made to customer specifications,all the moulds under quenching and heat treatment. The surface rigidity of the steel can reach to 58-62HRC ensure the service lifespan reach 100,000 cycles.

Main Technical Specifications for HAWEN HWG-1000 Block Making Machine Production per Mould:10 pcs/mould (Standard Block: 400x200x200mm)12 pcs/mould (Hollow block:400x150x200mm)52pcs/mould(Stock brick in SA: 200x100x70mm)24 pcs/mould ("H" shape paver: 200x160x60mm)28pcs/mould(Zigzag shape Paver:225*112.5*60mm)36 pcs/mould (Rectangle Paver: 200x100x60-80mm)Cycle Time:13-20 secondsProduction per Shift (8 Working Hours,with skilled workers)Hollow Block (400x200x200mm): 15,000~16,000 pcsHollow Block (400x150x200mm): 17,000~19,000 pcsStock brick(200x100x70mm):100,000-108,000 pcs"H"shape Paver (200x160x60mm): 28,800~38400pcsZigzag shape Paver(225*112.5*60/80mm): 40,000~50,000pcsRectangle Paver (200x100x60-80mm): 52,000~69,000pcsVibrating Frequency:2800-4500RPMMotors Power:52.5 KW For Main forming machine parts only Machine Dimensions:8800x3400x2800mm Pallet Size:1100x950mm or 1200x900mmGross Weight:about 12TRaw Materials:crushed stone, sand, cement, dust and coal fly ash, cinder, slag, gangue, gravel, perlite, and other industrial wastesApplied Products:concrete blocks, solid/hollow/cellular masonry products, paving stones with or without face mix, garden and landscaping products, slabs, edgers, kerbstones, grass blocks, slope blocks, interlocking blocks, etc.Applied Fields:widely used in buildings, road pavings, squares, gardens, landscaping, city constructions

Application of HWG-1000 Servo vibration block making plant on site
HWG-1000 block making machine,with Automatic Block Stacker,Automatic Pallet provider, MP1000 Planetary Concrete mixer on site
MP1000 Planetary Concrete mixer,using Conveyor belt to transfer the raw material to Concrete mixer
PL1600-4 Concrete Batching machine under the shed,separating from the workshop of main forming machine
Wet Concrete brick in curing yard under the shed
The wet concrete brick will be kept under the shed in the first day,then it will be transferred to stock yard for nature curing in the second day,
the Brick will be removed off and packed by off-line automatic cuber system if the automtic cuber system is available.
Container loading in workshp for customers overseas



FAQ
1. How many square meters required to set up a block factory?
Answer:Generally,the whole factory requires 5000 square meters, including the recommended workshop to cover the equipments at 500 square meters,equipments are suggested to keep under the shed.
2.What kind of material can be used to produce concrete block?
Answer:Crushed stone(Max.10mm),sand and Cement as raw material, coal fly ash, cinder, slag,gangue, gravel, and other industrial wastes.And if customer makes the top colored paving stone,then the face material of fine sand and white cement and pigmen are required.
3.Can I get the warranty for the machine?
Answer:The warranty for the machine is one year after installation or 15 months after shipment,whichever comes first.Spare parts will be sent to customers for free of charge during the warranty period. Warranty does not cover the wearing parts, in cases of incorrect handling, improper user, insufficient maintenance, unauthorized service or modifications to the machine, normal wear .

4.What is the delivery time?
Answer:The delivery time is 30-40 days upon receiving the down payment and mould drawing approval from customer.
5. What about your payment terms?
Answer:T/T and L/C are acceptable.
Generally,it requested to pay 30% as depoist by T/T before production, and the balance to be paid by T/T or Irrevocable,Confirmed LC at sight before shipment.
6.How to prepare the foundation for the equipments?
Answer:The foundation drawing for the whole plant will be provided within 07 days after the order /confirm/ied,customer could prepare the foundation construction according to the drawing provided.
7.How about the installation & commissioning ?
Answer:After the equipments arrive customer's site,and the preparation for the foundation,water & electricity are ready,we will send 1 of our technician for the installation & commissioning,the technician will train customer's staff for the operation and maintenance of equipment.
8.How about the installation cost?
Answer:We will send our technician for the installation,customer should responsiblefor all the expense and the allowance of our technician.
9.Are the machine be tested in your factory before shipment?
Answer:Yes all of our machines will be tested in our workshop before container loading.You are warmly welcome to do the inspection before shipment.
10.Can I visit your factory before placing the order and where is your factory ?
Answer:You are warmly welcome to visit our factory any time.Our factory located in Quanzhou City,Fujian Province.
The nearest airport to our factory is Jinjiang airport,which is 30 minutes to our factory by car.
How to come to your city?
Answer:You could take the international flight to Guangzhou airport first,then take the domestic flight from Guangzhou airport to Jinjiang airport,we will pick you up from Jinjiang Airport.
Or take the high speed train From Guangzhou South to Quanzhou train station.
Trust us with your project, we will provide the Optimal Concrete Products Making Solution for you all the time.
Welcome to contact our sales team:

Sales line: +86 18959896890