China Contec Ce FDA Approved Cms50d Six Colors OLED Display Fingertip Pulse Oximeter

FDA CE ConTEC CMS50D OLED Display Fingertip Pulse Oximeter

Introduction

Principle of the CMS50D OLED Fingertip Pulse Oximeter is as follows: Photoelectric Oxyhemoglobin Inspection
Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology,the Pulse Oximeter
can be used in measuring the pulse oxygen saturation and pulse rate through finger.Pulse Oximeter is suitable for
being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before
or after doing sports, and fingertip pulse oximeter is not recommended to use the device during the process of
having sport) and etc.

Feasures:
1. Integrated with SpO2 probe and processing display module
2. Small in volumelight in weight and convenient in carrying
3. Operation of the product is simple, low power consumption
4. SpO2 value display
5. Pulse rate value display, bar graph display
6. Pulse waveform display
7. Screen brightness can be changed
8. Low-voltage indication: Low-voltage indicator appears before working abnormally which is due to low-voltage
9. Automatically power off function: When the device is under the state of measuring interface. It will automatically power off
within 5 seconds if the finger falls out of probe
10. Display format can be saved after power off
Main performance
1.Display Mode: 0.96"Dual-color OLED display(blue and yellow)
2.Screen Resolution: 128*64
3.SpO2 Measuring Range: 0%~100%, (the resolution is 1%).
4.Accuracy: 70%~100%: ± 2%, Below 70% unspecified.
5.PR Measuring Range: 30bpm~250bpm, (the resolution is 1bpm)
6.Accuracy: ± 2bpm or ± 2% (select larger)
7.Measurement Performance in Weak Filling Condition:
8.SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ± 4%, pulse 9.rate error is ± 2 bpm
or ± 2% (select larger).
10.Resistance to Surrounding Light: The deviation between the value measured in the condition of man-made light or indoor
natural light and that of darkroom is less than ± 1%.
11.Power Consumption: Less than30mA
12.Voltage: DC 3.0V
13.Power Supply: 1.5V (AAA size) alkaline batteries x 2
14.Battery Working Hour: The minimum continually work time is 20 hours, theoretical number is 36 hours.
15.Safety Type: Interior Battery, BF Type
Accessories
Sell in standard:
1. A hanging rope
2. A user manual
Accessaries
1.Battery
2.Black carry case
3.Silocon rubber case
More information about China Manufacturer of OLED Display Fingertip Pulse Oximeter ,fetal doppler supplier/manufactuer,ultrasound scanner supplier/manufactuer ConTEC MEDICALSYSTEMS CO., LTD