China Conventional Horizontal 32T Large Heavy-Duty 10m Lathe CW61200x10000

Heavy-duty Lathe
Full range of products---from 250mm~6300mm; Load capacity: 3~500T
BEDWAY: HARDENED & GROUND
ELECTRICAL POWER: 380V/3PHASE/50HZ

ITEM CW61200x10000 18TSWING OVER BED2,000 mmSWING OVER CARRIAGE1,600 mmWIDTH OF BED DISTANCE BETWEEN CENTERS10,000 mmSUPPORT WEIGHTS BEWTEEN CENTERS18 TONSpindle taper HOLEMETRIC NO. 140SPINDLE SPEED3 STEPS; 1 TO 125 RPMSPINDLE BORE 100mmMETRIC THREADS56 KINDS, 1 TO 120 mmWHITWORTH THREADS56 KINDS, 30 TO 1/4 T.P.I.MODULE THREADS56 KINDS, 0.5 TO 60DIAMETRAL PITCH THREADS56 KINDS, 60-0.5TRAVEL OF QUILL300 mmTAPER IN QUILL80 mm; 1:7POWER OF MAIN MOTOR WITH ADJUSTING SPEED DEVICEDC 49 kWPower of rapid motorPower of rapid motorPower of OIL pump motor0.55 KWPower of cooling motor0.15 KWPower of TAILSTOCK motor1.5 KWBEDWAYBEDWAYELECTRICAL POWER380v/3ph/50hzNET OVERALL DIMENSION OF THE MACHINE12,920x2,380x2,510 mm




ACCESSORIES
FOUR JAWS CHUCK, DIA. OF 1,600 mm
STEADY REST, RANGE FROM 400 TO 750 mm
FOLLOW REST, RANGE FROM 50 TO 220 mm
WORK LIGHT
FOUNDATION BOLTS & LEVELING PADS
DEAD CENTER
SPECIAL TOOLS
OPTIonAL ACCESSORIES
STEADY REST: 500 TO 1100 mm/
SUPPORT WITH TWO ROLLERS, RANGE 850 TO 1200 mm
SAFEGUARD FOR CHUCK AND TOOLPOST
Quality Control & Inspection before Packing
We control the assembly quality as well as control the quality of casting and parts/units to ensure the machines will be good enough from appearance to performance and stability keeping.
After testing and painting before packing, we will check all the accessories item by item:
Packing & Local Transportation & Fixing
Normally we will pack the machines with fumigated wooden cases or poly wooden case and steel pallets. When the machines are loaded into the container, fixing job will be done to ensure the sea shipment safety.
FAQ
1. How can I choose the most suitable machines?
A: You can choose the exact model by yourself. Or you can tell us your specifications, to let us choose the best model for you, too.
You can also send us the product drawing, and we will choose the most suitable machines for you.
.
2. When do you deliver?
A: It depends on the machine and model you choose. Mostly 1.5 months - 3 months. All machines are 100% new and not used, only made according to your order. Occasionally there will be a few machines available from stock. You can send us a message or mail to check exact delivery time.

3. Is machine tested?
A: The accuracy, noisy will be tested according to China GB standard. Some machines will

4. What is your trade terms?
A : FOB, CFR and CIF all acceptable.

5. What's the Payment Terms?
A : T/T 30% down payment when order ,70% balance payment before shipment ;
Irrevocable L/C at sight also acceptable.

6. Do you accept cash or L/C?
A: We accept T/T or L/C, all through banking system. We do not accept cash, 'cause we are an official registered company that all payment must go through official bank account.
7. What's the MOQ?
A: 1 set (only some low cost machines will be more than 1 set)
8. How is the warranty?
A: 12 months after shipment date
9. If I have a problem setting up/ getting it running problem, will you be available by email to assist in solving the problem.
A: Video technical support, online service, we can answer you in 24 hours.