China Conventional Horizontal Hardware Processing Metal Turning Machine Tools Ca6150

Conventional Horizontal Hardware processing metal turning machine tools CA6150

Product ApplicationApplication:

1 CA series ordinary horizontal lathe is used to turning internal and external cylindrical surface, conical surface, and other rotating surface, turning various metric and inch, modulus and pitch thread, and the pitch diameter of the thread and pull the drilling and oil tank etc., is general very strong horizontal lathe, Widely applicable batch processing of various shaft and disc parts.
2 The series lathe bed width in general lathe, 400mm rail width has higher stiffness, rail surface by intermediate frequency quenching, wear-resistant durable..
3 Handy machine operator concentration, slide plate is provided with a quick moving mechanism. Using single handle operation,humanization.
4 The rigidity of the machine tool structure and the transmission stiffness are higher than the general lathe, the power utilization rate is high, which is suitable for the strong cutting.
5 Before leaving the machine tool factory, the machine tool is tested strictly according to the inspection procedure, and the machine tool is tested to ensure that the machine tool has good stability and reliability.

Product main technical parameters:

Type

CA6140
CA6240

CA6150
CA6250

CA6161
CA6261

CA6166
CA6266

CA6180
CA6280

Max. swing over bed

400mm

500mm

610mm

660mm

800mm

Max. swing over carriage

210mm

300mm

370mm

400mm

540mm

Max. swing in gap

630mm

720mm

830mm

880mm

1020mm

Max. effective length in gap

210mm

Max. length of workpiece

750/1000/1500/2000/2200/3000/4000mm

Width of bed

400mm

Section of turning tool

25x25 mm

Main spindle motor

7.5kw(10HP)

Spindle

Spindle speed

16--1400rpm(24step)

Spindle bore

52mm (80mm),(105mm)

Spindle taper

No.6(MT6)(Φ90 1:20)[Φ113:20]

Feed

NO. of feed

(64 kinds)(for each)

Range of metric threads

(1-192mm) (44 kinds)

Range of inch threads

(1-24tpi) (21kinds)

Range of module threads

0.25-48 (module 39 kinds)

Range of diametral pitch threads

1-96DP (37 kinds)

Tailstock

Max. tailstock spindle travel

150mm

Tailstock spindle diameter

75mm

Taper of tailstock spindle centre hole

1-96DP (37 kinds)

Packing dimensions (L*W*H)

Overall dimensions for 750mm

2440x1140x1750mm

Overall dimensions for 1000mm

2700x1140x1750mm

Overall dimensions for 1500mm

3200x1140x1750mm

Overall dimensions for 2000mm

3700x1140x1750mm

Overall dimensions for 2200mm

4030x1140x1750mm

Overall dimensions for 3000mm

4800x1140x1750mm

Overall dimensions for 4000mm

5680x1140x1750mm

Weight (kg)

Overall dimensions for 750mm

2100

2170

2300

2400

2520

Overall dimensions for 1000mm

2200

2260

2380

2580

2720

Overall dimensions for 1500mm

2380

2450

2577

2830

3000

Overall dimensions for 2000mm

2750

2800

3000

3050

3300

Overall dimensions for 2200mm

2800

3000

3150

3400

3500

Overall dimensions for 3000mm

3300

3500

3600

4000

4220

Overall dimensions for 4000mm

3500

3800

3950

4600

4900

Details Display

packing shaping

For machine: usually by sea;
For documents: by international express, eg. DHL,TNT or EMS.
For packing :Free fumigation plywood packaging steel base
our service
1. Technical support online service provided.
2. Technical files service provided.
3. Machine operation video provided
4. On-site training service provided.
5.Spare parts replacement and repair service provided.
6 All of the questions will be replied within 8 hours
7. If you need to develop products with your own specification, we can help you to work it out.
8. Always be honest, never lie to customer, and never declare anything we don't have
Company Information
Since 1996,20 years' history for machine tool manufacturing
10 years' history for export
Total 2 manufacturing bases in china
Sino-germany technology cooperation
Production of 8 categories, more than 130 kinds of products
Set up design&research center at TAIWAN
Exported to total 48 countries in the world covered most areas
One-stop shopping for nearly all other types' machine tools
1:How can I choose the most suitable machines ?
A: Please tell me your specifications ,we can choose the best model for you , or you can choose the exact model You can also send us the products drawing ,we will choose the most suitable machines for you .

2: What's your main products of your company?
A: We specialized in all kinds of machines ,such as CNC Lathe Machine ,CNC Milling Machine ,Vertical Machining Center ,Lathe Machines ,Drilling Machine ,Radial Drilling Machine ,Sawing Machine ,Shaper machine and so on .

3: Where is our factory located? How can I visit there?
A : Our factory is located in Tengzhou City ,Shandong Province,277500 China. You are warmly welcomed to visit us.

4. What is your trade terms?
A : FOB, CFR and CIF all acceptable.

5: What's the Payment Terms ?
A : T/T ,30% initial payment when order ,70% balance payment before shipment ;
Irrevocable LC at sight .

5: What's the MOQ?
A: 1 set .(only some low cost machines will be more than 1 set )

We want to know:
1.What's your Industrial Voltage?
2.We strongly suggest you to tell us size, material of your workpiece for our evaluation, if possible, better to send us workpiece drawing, so that we can recommend you most suitable model!
3.If need CIF Price, please kindly tell us the port of destination.
Contact Us