China Conveying Green Belt Building Machinery with BV ISO SGS

Product Profile:
Tension Conveying Green Belt Building Machine production line is mainly used in nylon belt, EP belt, layered cotton canvas belt building and conveying belt rubberzing.
Our Machine Advantage:
The production line in the building process, The blank in the control of magnetic powder brake, then tension state assembly, the cloth guilding and coiling the wrinkle device ensures the cloth not wrinkle, building operation on both sides of the back and forth; material car can manually adjust the width direction of the position;in the tensioning roller device of the nearby set up an emergency stop button. The rotation speed manual control. All the electrical configuration on the same side, cloth coiling roller can be separated form, the production line can be two round-trip lamination, tensioning roller in middle position of whole line.
Specification:

ModelDCS-1400DCS-1800DCS-2400DCS-2600Max Width of green belt(mm)1200160022002400Max Thickness of green belt(mm)30303040Max diameter of reeled green belt(mm)3000350035003500Max weight of green belt (Ton)10101010Max speed of green belt (m/min)5-305-305-305-30Max thickness of rubber sheet(mm)1-201-201-201-20Tension control mode Tension brakeTension brakeTension brakeTension brakeDeviation correcting systemServoServoServoServoLength of building platform(mm)3000300030003000Height of building platform (mm)820820820820

FQA-Problems of customer concern:
about machine performance quality
1. Q: How to guarantee the quality of outsourcing parts?
A: First choice more than 2 suppler by tender, There are strict system and process for inspecting outsourcing parts. And there are outsourcing inspectors, after inspection, qualified goods, labeling and storage. Not qualified, return.
2. Q: Which brand of electric part?
A: Use world famous brands, Siemens, Omron, Toshiba, Schneider, ABB
Customer can specify the brand.
3. Q: Which PLC:
A: Siemens, Omron, Mitsubishi
4. Q: How to control the quality?
A: There are inspectors for inspecting equipment quality and performance, after assembly, machine run continuously for at least 12 hours at one time, Total running time should be not less than 48 hours.
about installation
1. Q: When the guide engineer arrive at customer's factory?
A: If need installation on site, engineer will arrive at factory within one week after machine arrived at factory.
about after-sales service
1. Q: What is the warranty time?
A: 2 years after machine arrived at factory
2. Q: How to solve the problem?
A: Within one hour after getting customer' problem, inform the solution way, there are three ways for different conditions. 1, Which can be solved by phone or Email, it will be solved in two hours. 2. Which can be solved by Remote Control, it will be solved within four hours(machine is equipped by Remote Network Control Problem). 3. Which need solve it on site, engineer arrive at factory within one week(in the two years warranty date, engineer has the visa any time of the country where the machine.
Machine Installation at our company:
Machine running at customer's factory:
Customer Inspection: