China Conveying System for Pipe Bevel Cutting Machine

Pipe Conveying System for Bevel Cutting Machine
Model: PLTPS-24D1/D2
Performance features
Conveying the pipe automatically or manually when the bevel cutting machine works and the pipe can be removed from the machine with a turnover mechanism if necessary.
It increases the automatization level in the pipe fabricating plant and decreases the hazards during hoisting.
Technical parameters
Pipe diameter applicable: DN50~600(φ 60~610)
Conveying length: Feed in end≥ 1, 000MM; Feed out end≥ 500MM
Line length: 7.5M at Feed in end and 7.5M at Feed out end (or depend on situation)...
Line height: 800MM
Material of the roller bench: Carbon steel with blue treated surface (coated with rubber if necessary)
Conveying speed: 2~20M/Min
Speed-regulation Mode: Manual/VF stepless speed adjustment
Control system: Manual/PLC control, shared with the pipe cutting length-fixing system (or depends on the situation).
Turnover mechanism: Nil (or depends on the situation)
Lifting system: A lifting system could be equipped if required so as to adjust the center elevation of pipes automatically and to bevel the pipes of the different diameter.
DescriptionDetailsPipe diameterDN50~600(& phi; 60~610) Conveying lengthFeed in end& ge; 1, 000MM; Feed out end& ge; 500MM Line length: 7.5M at Feed in end and 7.5M at Feed out end (or depend on situation)...Line height800MM Conveying speed2~20M/Min Lifting systema lifting system could be equipped if required so as to adjust the center elevation of pipes automatically and to bevel the pipes of the different diameter.
our company is the most innovation ability provider of integrated solutions for piping fabrication, also is the unique provider of professional piping plant design software & management software system and piping equipments in China which included pipe spool fabrication line, cutting equipments, beveling equipments, fitting up equipments, handling equipments, welding equipments.