China Copper Aluminum Busbars Shearing Punching Flat Honrizental Bending Vertical Bending Knurling Machine

CNC Busbar Processing Machine
Technical Parameters

FunctionItemMX-303SKMX-503SKPunching(Kn)Max . strength300500(mm)Diameter rangeФ4.3~Ф25Ф4.3~Ф34(mm)Max . thickness1216(mm)Max . width150250Shearing (mm)Max . shearing thickness1216(mm)Max . sharing width150250Honrizental bending(Kn)Max . strength300500(mm)Max . width150250(mm)Max . thickness1216Vertical bending(mm)Max . width100(10mm)120(10mm)(degree)Min . angle90°90°(mm)Dimension (mm)1500*1300*12001800*1500*1300(Kw) Power(Kw)3*4Kw3*5.5Kw(Kg) Weight(kg)1250kg1750kgCNC precision(degree)Bending precision±1°±1(degree)Repeat Bending precision±0.3°±0.3°

Product Description
This series CNC busbar processing machine has three units: punching, shearing and bending. It is easily to adjust each unit to shorten the processing time and improve the production efficiency. The bending unit uses the imported PLC control system, which have stable system and high precision. It is used to processes copper and aluminum busbars in different specification. By relative operation unit if can easily and quickly do all kinds of processing to copper and aluminum busbar, such as shearing , punching(circular hole and oblong hole), flat/honrizental bending, vertical bending and knurling. Change different mold to do special processing to copper bar, such as flat press, embossing, cable connector process, and can do cutting, flat crushing, pushing, and bending.
Main characteristics
The shearing unit uses sharp shearing, the incision interface is flat, no droop and burrs and waste, beautiful shape.
The punching unit uses an united six-mode template in tooth shape to make sure the upper mold and the lower mold are absolutely in the center, improve the mold concentricity and longten the working life. The turnplate is in tooth shape with good view and high strength. No need to frequently change molds, labor intensity is highly reduced. It is easy and quick to use. Producing efficiency is obviously higher than a traditional one.
The unit uses a closed structure to make sure the flat bending and embossing morem smooth, which highly improve the repeating precision during mass production and prolong the working time. The bending unit is a honrizentaly operating rype and it is very easy to operate.
S series allow three working positions can do their only operation at same time without bothering the others. Working efficiency is highly raised, D series only allow one person to operate.
The machine has four casters so it is easily to be moved everywhere there are two operating modes, manual button and foot switch, which is easily for worker to operate and use. based on user's requirement, it can do all kinds of special shape processing with different molds or equipping parts.
Applicable for
It is special machine for cutting,bending and punch- ing on aluminum and copper bus bars.Various samples; cut angle sample; twisting bend copper bar; press cable joint sample; embossing sample; cutting sample; punching sample
Our Factory
Part of Machine
FAQDelivery Term: FOB Qingdao, by vesselDelivery Time: 35 working daysPayment Terms: T/T (30% to pay by T/T as down payment , the rest 70% is paid by T/T before delivery.)Installation / Operation / Service / Manual: In EnglishInstallation team: Commissioning service provided for 4-7 days. The client bears the technician's round-trip flight tickets, accommodations and daily salary USD80.)Warranty: One year from the date of completion of the commissioning.Pre-shipment Inspection: Supplier should trial run whole line at supplier's factory before shipment.Packaging & Shipping