China Cotton Fabric Ep Nylon Pattern Oil Resistant Conveyor Belt

Conveyor belt
FEATURES

The carcass of this belt is made from cotton/cotton fabric both in warp and weft or terelyene/cotton fabric in warp and cotton fabric in weft

This type of belt will exhibit good flexibility, excellent trough-forming ability and is an economical solution for your conveying needs.

APPLICATIONS

Best suited for conveying products in short distance and suitable for but not limited to conveying of powder, granules and weak abrasive materials such assawdust, grain, coal and cements, etc.Operating temperature: 10°C-60°C

BELT TYPES

Belt types include normal, oil resistant, acid and alkali resistant, cold resistant and anti-static grades

TECHNICAL DATA

Standard: In accordance to ISO/FDIS 14890:1990

Performance at Overall Thickness

Belt length can be customized on request and the maximum length is no more than 300 m.

Fabric TypePly
Thickness
(mm)Nominal Tensile Strength
at Overall Thickness
(N/mm)Longitudinal
Elongation
at Break
(%)Longitudinal
Elongation at
Rated Stress
(%)Belt
Width
(mm)Standard
Belt
Length
(M)2ply3ply4ply5ply6plyTerylene Cotton TC-701.0140210280350420≥10≤4300
~
1500200Cotton

CC-56

1.0112168224280336

Performance of Cover Rubber (for General Applications)

Note: The cover rubber performance for other belt types like oil resistant, acid and alkali resistant, cold resistant and

anti-static belt, please refer to the corresponding belt introduction.

Cover GradeTensile StrengthElongation at Break
(%) ≥Abrasion Loss
(mm³ ) ≤Change Rate of Tensile
Strength & Elongation
after Aging (%)(MPa) ≥(Kg/cm²) ≥Ordinary Applications (L)15.0150.0350200-25 ~ +25Abrasion Resistant (D)18.0180.0400100-25 ~ +25Extreme Tear Resistant (H)24.0240.0450120-25 ~ +25When cover rubber thickness ranging from 0.8~1.60mm, it allows 15% tolerance of tensile strength.
Aging Test: 70ºCx168h.

Adhesion-Ply to Ply

ItemCanvas Ply to
Canvas PlyCover to Canvas PlyCover Thickness 0.8-1.5mmCover Thickness >1.5mmAverage Value of Samples (N/mm) ≥3.02.12.7Minimum Value of Samples (N/mm) ≥2.71.62.2The peak value of all samples are less than 20N/mm.

We also have patten conveyor belt.

Type of Pattern:
1) Chevron conveyor belt (Raised & Sunk herringbone)
2) Round pit conveyor belt
3) Diamond conveyor belt
The workshop of our belt
The other products of our conveyor parts:
Could you please send me inquiry for details?