China Creator Chv850 CNC Engraving Machine

Creator Industry Chv850 CNC engraving center
Brief Introduction:
Creator Precision Co., LTD. was established in Taiwan at 1986.
In 1997 , Creator Industry (Suzhou) Co., Ltd. was found to extend Mainland China market. 1.The registered capital is USD 5,080, 000.
2.The new factory covers 24,680sqms and holds a building area of 19,000sqms.
3.There are 250 employers which assure
4.Annual production at least as 600 sets of EDM and 100 sets of VMC.
Unit Features:
1. The major structures are manufactured from Meehanite cast iron, stress relieved and combined with scientific rib reinforcement to ensure deformation-free operations.
2. Increase width on the column bottom with box-type structure provides maximum stability especially when performing high speed cutting.
3. Linear ways on three axes assure high feed rates and extremely smooth motion.
4. Extra wide span between linear ways greatly increases machine stability.
5. The structural parts are analyzed and designed by the advanced Finite Element Analysis. It provides a detailed analysis for structural stress/strain conditions, and ensures excellent machine rigidity and lifetime stability.
6. Linear guide ways:
The machine employs 45mm wide ball-type linear guide ways. (Optional)
7. Precision ball screw:
Three axes are transmitted by high precision C3 grade ball screws, preloaded, hardened and ground-assuring dependable feed accuracy.
8. Choice of 30, 000 rpm high speed spindles are designed for high speed machining requirement.
9. Extra wide column bottom and base ensure simplified machine structure for space saving.
10. The three axes ball screws are directly coupled to servos through backlash-free couplings. This ensures dependable positioning accuracy. High precision class C3 ball screws are preloaded to eliminate thermal strain.
Standard Accessories
1. Spindle oil cooler unit
2. Full splash guard
3. Cutting coolant unit
4.Heat exchanger in control box
5.Auto power off
6.Auto lubrication system
7.Air blast through spindle
8.Work lamp
9.Tool box and tools
10.Rigid tapping
11.Mechanical, electrical operating manuals
12.RS-232 Interface
13.Transformer
14.Water gun.
parameters:

Model CHV-850TRAVEL LINEAR GUIDE WAYX axis travelmm850Y axis travelmm550Z axis travelmm580Distance from table surface to spindle nosemm120~700TABLE table areamm1020x550Max. load of tablekgs600T-slotmm4 x 18 x 125SPINDLE 80000RPM StandardSpindle taper BT-40BT-40HSK-50ESpindle speedrpm8000/1000010000/12000/1500024000/30000Transmission type BeltDirect DriveBuilt-in Spindle motorkw5.5/7.55.5/7.515/17Spindle cooling Oil coolerFEED RATE Rapid traverse(X, Y)m/min30Rapid traverse(Z)m/min20Cutting feed ratemm/min1~100003 Axes motor output(X, Y, Z)kw1.8/1.8/2.5A. T. C. Magazine type CarouselArmTool magazine capacitypcs16(20)24Max. tool diametermm100/15080/150Max. tool lengthmm250250Max. tool weightkgs77Tool selectiontypeFixed typeRandomOTHER Power consumptionKVA20Floor space(LxWxH)mm2940x2180x2350Machine weightkgs6200