China Crecent Tissue Paper Machine

Crecent Tissue Paper Machine

Application:

Mainly for the production of manufacture paper with pulp 13 - 30 g / m2, toilet paper. Paper napkin base paper

Crafts Parameters:

1. Pulp: wood pulp plate, waste paper etc as raw material

Feeding pulp concentration : 0.3-0.9‰Beating degrees : 30-38°SRPaper sheet dryness

come out from wire case : 18-20%

Before go through MG cylinder : 36-40%

Come out from MG cylinder : 90-94%

Finish tissue : 90-94%

Lateral shrinkage : 8-10%Day running hours: 22 hours/dPapermaking rate : 94%Yield : 95%Touch roll line pressure: 60 KN/m

Supporting parameter

1. AC voltage : 380V;50Hz

Control voltage : 220/24VWater pressure: 0.3Mpa;

Working pressure: 0.2Mpa

Compressed air pressure: 0.8Mpa;

Working pressure: 0.5Mpa

Steam pressure: 0.6Mpa;

Working pressure:0.3Mpa

Vacuum suction tank: 20-40KpaWater requirement: pure color, remove impurities, PH value 6.8

Main Technical Parameters:

1. Paper weight: 18-30g/m2

Net width of paper :1575mmDesigned speed : 250m/minWorking speed: 160-230m/minNominal capacity : 4-6T/DTrack gauge : 2400mmWrinkling rate : 15-30℅Drive way: Y-type AC motor drive division, section driveControl way:frequency conversionPower:

MG cylinder motor: 95kw

Roll-cylinder motor: 7.5kw

Total:102.5Kw

Arrangement: single-layer, the left and right hand arrangement

Item / PM type157518802400290035003900Design Speed (m/min)250250250250250250Working Speed (m/min)160-230160-230160-230160-230160-230160-230GSM Range (g/m2)13-3013-3013-3013-3013-3013-30Capacity4-65-87-108-1210-1511-18Diameter of Dryer (mm)Φ2500-3000Φ2500-3000Φ2500-3000Φ2500-3000Φ2500-3000Φ2500-3000Motor (kw)37-4545-5555-7575-9090-11090-110Gauge(mm)240028003400390045004800

Photos: