China Custom Classic Hospital Waterproof Custom Digital Thermometer

[product introduction]

This product has the functions of quick display reading, sound warning, high accuracy, high and low temperature alarm, energy saving, memory storage and automatic shutdown.

The operating voltage is 1.5V.Using high precision sensor and microcomputer technology can measure the temperature of human body quickly, accurately and conveniently.

The shell is made of non-toxic plastic imported from Japan, without the problems of easy breakage, mercury pollution and difficult reading of traditional mercury thermometer.

Safe and practical electronic thermometer, no longer worry about children using traditional temperature timing due to broken glass caused by mercury poisoning and other adverse consequences.And can in a very short time to accurately test the temperature, for the necessary household supplies.

Measuring accuracy up to 0.1 degree, with voice prompt, memory function.

It can be used for oral measurement, underarm measurement and rectal measurement.

[technical indicators]

Measurement range: 32°C ~ 42°C

When the measured temperature is lower than 32°C, L°C is displayed

When the measured temperature is higher than 42°C, H°C is displayed

Measurement accuracy: ±0.1°C

Power supply voltage: dc1.5v

Weight: about 12 grams

[usage]

1. Before use, cotton alcohol should be used to disinfect the sensor head and temperature measuring rod of the thermometer

2. Press the power button, the buzzer will beep and display the prompt symbol for about 2 seconds. Then the last measured temperature will be displayed for about 2 seconds and L°C will be displayed.

3. Put the sensor head of the thermometer into the measuring part, and the display shows that the temperature gradually rises.

At the same time, the °C symbol flashes, indicating that the measurement is in progress.

During the measurement, if the temperature remains unchanged for 16 consecutive seconds, the °C symbol will stop flashing, indicating that the temperature has been measured and the measurement result has been memorized, and the displayed temperature value can be read

4. If the temperature is > 37.5ºC, a short alarm sound is heard: bi-bi-bi-bi (once every 0.125 seconds), indicating that the measurement has been completed and indicating fever.

If the temperature is less than or equal to 37.5ºC, a slower sound is heard: bi-bi-bi-bi (once every 0.5 seconds), indicating that the measurement is complete and the temperature is normal.

5. If the measured temperature is less than 32.0ºC, LºC will be displayed.Greater than 42.0ºC, HºC is displayed.

6. After the measurement, if the power button is not pressed to turn off the power, it will automatically shut down after 10 minutes

The electronic thermometer is based on microcomputer technology to provide users with rapid, accurate and convenient temperature measurement effect.

The shell is made of plastic materials, without the problems of traditional mercury-type thermometers, which are easy to break, mercury pollution and hard to read.

To LCD LCD display.

[simple instructions]

(with instructions) :

Digital display temperature, clear, easy to read.The temperature measurement ranges from 32 °C to 42°C, with an accuracy of ± 0.1c

[locking function] :

Automatic memory, memory of the final temperature test results.Low power consumption, each battery can last up to two years.

Especially the electronic thermometer does not contain mercury, is harmless to the human body and the surrounding environment, can directly oral temperature measurement, especially suitable for the family, hospital and other occasions.

Display mode: LCD display

[product features] :

Accurate measurement, fast speed;Reading convenient, different from the general thermometer to see the scale, left according to the right according to the digital thermometer digital display, directly tell you how much.

[measurement reminder] :

Measured temperature will have a sound to remind you, different from ordinary thermometer, take early afraid of not measured, take late and delay time.

[memory function] :

The temperature will be remembered in the thermometer until the next measurement.

[battery replacement] :

1. When there is no digital display on the display screen, it indicates that the battery is low and the battery must be replaced as soon as possible to ensure the accuracy of measurement.

2. When replacing the battery, pull down the display screen of the thermometer, pull out the battery cover, and then gently pull out the thermometer movement about 5-15mm(do not force too hard, pull out too much, so as to avoid damage to the components), take out the old battery, install a new battery with the negative pole facing up, push the movement back to the original position, and then install the battery cover.

[notes] :

Electronic thermometer is a precision electronic product, so please note:

1. Do not fall from a height and distort the body.

2. The temperature-sensitive head to the front of the display screen can be disinfected with alcohol. Since there is no waterproof device for the display screen and the later part, it can only be wiped with a dry cloth.

3. Do not open any parts except to replace the battery.

4. Do not expose to high temperature and direct sunlight, and do not touch any corrosive articles, in order to prevent chemical changes of the parts, affecting the operation function.

5. Please dispose of waste batteries properly. Do not throw them away to avoid polluting the environment and water.