PVC Edge Banding, Edge Banding, Edge Banding PVC manufacturer / supplier in China, offering Good Price Wood Grain PVC Edge Banding for Modern Furniture Accessory, General Purpose Flexible Size Silicone Bar Hot Melt Glue Stick, Furniture Material 4X8 PVC Foam Board Plastic Sheet/Board/Panel and so on.
Min. Order / Reference FOB Price | |
---|---|
3000 Meter | US $0.50/ Meter |
Local Area: | Shanghai, China |
---|---|
R&D Capacity: | OEM, ODM, Other |
Payment Terms: | LC, T/T, D/P, PayPal, WesternUnion, Small-amountpayment, MoneyGram |
Customized: | Customized |
---|---|
Material: | Acrylic |
Usage: | Cabinet, Door, Shelf, Table, chair, Sofa, Bed |
Product NameHigh quality cheap customized furniture accessories acrylic edge bandingThickness1mm, 1.2, 1.3mm,1.5mm ,customized sizes can be organizedWidth21mm,22mm,23mm,29mm,40mm, customized sizes can be organizedColorSolid color,Woodgrain color,two tone color, tri-color , customising as buyer requiredMaterialAcrylic(PMMA,3D,)Packing100m/Roll or as per customer's requirementMOQ3000m/ColorFeaturePre-glued,Scratch resistance,Corrosion resistance,Superior durabilityUsageFor various furniture edge banding(cabinet door edge banding )Price termsFOB ShanghaiPaymentT/T,L/C,PaypalDelivery Time15-20 days for first order(matching colors)reperated order 10-15 days.
PVC edge banding is divided into several proportions according to the ratio of added PVC and calcium carbonate.
When the proportion of calcium carbonate is high, the physical properties are unstable, the PCV edge banding will be easily broken and fade color. High-quality PVC/ABS edge banding, due to the high proportion of PVC components, product stability is very high, then it will not be easily broken and fade color.
The quality of PVC/ABS edge banding is generally reflected in the following aspects:
1. The surface is smooth, no bubbles, no lines, and the gloss is moderate;
2. The surface and back are flat, uniform in thickness and uniform in width;
3. The hardness is reasonable, the higher the elasticity, the better the quality and the stronger the wear resistance;
4. The back treatment agent is transparent or white, and The coating should be uniform. If it is not handled properly, it will result in low adhesion and even unable to be bonded after the edge banding;
5. The color of each batch of edge banding should be as consistent as possible.
The smaller the color difference of different batches, the better the quality;
6. No debris and gaps while trimming and cutting.
1. Mostly, the higher the temperature, the better the bond strength. It is recommended to use medium and high temperature hot melt adhesive as much as possible for best results.
2. Manual edge banding machine or semi-automatic edge banding machine are not recommended , because there is no polishing function, it is recommended to manually polish to ensure the trimming effect.
3. During the process of use, if the glue line is too thick or there is overflowing and drawing, it is necessary to adjust the speed of the edge banding machine and the temperature of the hot melt adhesive.
4. If the surface of the edge banding tape is easily scratched by the equipment during the edge sealing process, the surface of the edge banding tape is not properly treated and is unqualified.
5. In the process of using the edge banding, if the sealing does not occur, please check whether the indoor temperature and hot melt temperature are correct (no less than 18°C) or the speed of edge banding machine is too slow.