China Customized High Barrier PE Plastic Film Casting Shrink Wrap Film

Customized High Barrier PE Plastic Film Casting Shrink Wrap Film
Product Description:
PE/EVOH/PE coextrusion film is a five-layer film with both sides heat sealable. As ethylene-vinyl alcohol copolymers, EVOH, colorless transparent, is an excellent barrier material. This product, extending shelf life of goods and providing transparent visual effect, are applied in packaging of food, beverage and easily oxidized products as barrier heat-sealing layer of laminates, or used in automatic packaging or bag making.
EVOH is excellent in oil resistance, organic solvent resistance and long-time fragrance-holding performance and prevents unfavorable gases from penetrating inside.
Since the product is multi-layer extruded, there cannot remain any residual solvents. Meanwhile, because of its easily recovered property and producing no hazardous gases after burning, it is reputed as green environmental friendly material and is gradually gaining attention of the world, showing the most potential market growth trend.
It is widely applied in meat packaging, fresh food packaging and medicine packaging.
Product Performance:
1. Highly puncture-resistant, flexible;
2. With high barrier property;
3. With excellent solvent barrier property;
4. Aroma-preserving;
5. Highly transparent;
6. Good heat-seal properties and hot tack in automatic packaging;
7. Good seal integrity and anti-pollution;
8. Can be boiled;
9. Good transparence and appearance;
10. With excellent film thickness deviation.

Kindly Reminder
Please advise the barrier material, thickness, size, style and quantity you prefer and other requirements, we will glad to help you with your choosing the right products and give you the best price.
1. Test Condition: 20º C, 65%RH (Except as otherwise provided by test methods. )
2. EVOH=15u
Attention: Above data is measured value, not specified value.
Product Storage Conditions: The product is made of plastic raw materials, easily burning, please store it in 5º C~35º C dry and well-ventilated environment, and keep it away from heat source at least 1m away.

ItemTest CriteriaUnitValueThicknessSurface Contactum95Tensile StrengthMDASTM D882MPa20.4TD18.78ElongationMDASTM D882%341.8TD387.3Thermal ShrinkageMDWithstanding high temperature up to 100° C (boiling water) for 5 minutes %1TD-1OTRASTM D3985(20° C65%RH)c m3/m2. d. bar4.69WTRASTM E96(40° C90%RH)g/m2. d3.73HazeASTM D1003%4.1TransparenceASTM D1003%87.2Coefficient of FrictionFilm and FilmASTM D1894 0.23Film and metal0.17Wet TensionCoronaASTM D2578Mn/M40Corona Free35