China Cylindrical Grinder of Smac Br

Cylindrical Grinder(MW1320/MW1420/M1432B)
CG series cylindrical surface grinder is suitable for grinding outer surface of cylinder and taper.
UCG series cylindrical surface grinder is suitable for grinding outer/inner surface of cylinder and taper.
The longitudinal movement of the worktable is driven by hydraulic or by handwheel. The worktable can be to a certain degree so as to be suitable for grinding taper.
The wheelhead cross feed is driven by hydraulic, which realizes automatic periodical feed and rapid feed and ropid feed. It can also do rough and fine feed through handwheel.
The worktable and wheelhead guide way of the CG50, UCG50 series adopt hydrostatic lubricaaaaaaation, its mivement onlow speed is smooth.
The spindle of CG50 and UCG50 series is supported by hydrostaitc and hydrodynamic bearings of high rigidity, it makes the spindle have high rotary accuracy and perfect rigidity.
The wheelhead of CG50 adopts double-speed motor and its speed can be changed by changing the position of belt. The wheelhead of the universal type(UCG50)adopts inverter motor to realize stepless speed changing. The wheelhead spindle of the universal type(UCG50) adopts sliding bearing structure. The clearance of the realize stepless speed changing. The wheelhead spindle of the universal for the grinding use center of chuck. The workhead of the universal type can be rotated to any position within its conterclock direction 90 so it can be suitable for grinding inneror outer surface of taper.
The UCG series universal cylindrical grinder has internal grinding apparatus, internal grinding spindle is supported by precise rollbearing.
The worhead spindle, wheelhead spindle, internal grinding spindle, coolent pump, hydrodynamic and hydrostatic oilpup arre driven by separatemotors.
Each moving parts of the machine has electric, hydraulic and mechanic interlock structure the machine is well designed with pleasing appearance, all control level are centralized in panel make operating easy.
The wheel dresser can be assembled on the worktable surface or on the tailstock.