HC-804GP-G POE Gigabit Ethernet Switch is an ideal solution. Each 10/100/1000Mbps port of the HC-804GP-G features IEEE 802.3af and IEEE 802.3at Power over Ethernet (POE) that combine up to 65-watt POE budget on the whole system, It is designed specifically to satisfy the growing demand of higher power consuming network PD (powered devices) such as PTZ (Pan, Tilt & Zoom) / speed dome network cameras, multi-channel (802.11a/b/g/n) wireless LAN access points and other network devices by doubling POE power, more than the current conventional 802.3af POE.
All RJ45 copper interfaces of the HC-804GP-G support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cables. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables. 1extra 10/100/100Mbps RJ45 for uplink.
Typical applications please refer to following picture
FeaturesComplies with IEEE 802.3, 10base-T, IEEE 802.3u 100base-TX, IEEE 802.3ab 1000base-T4-Port 10/100/1000Mbps supports 52V DC power to POE Powered Device 1-Port 10/100/1000Mbps RJ45 interface for uplinkComplies with IEEE 802.3af/802.3at Power over Ethernet End-Span PSEUp to 8 IEEE 802.3af devices poweredSupports POE Power up to 15.4 watts for each POE portUp to 4 IEEE 802.3at devices poweredSupports POE Power up to 30 watts for each POE port65-watt POE budgetAuto detects powered device (PD)Circuit protection prevents power interference between portsRemote power feeding up to 100mHardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-XFeatures Store-and-Forward mode with wire-speed filtering and forwarding ratesIEEE 802.3x flow control for full duplex operation and back pressure for half duplex operationIntegrates address look-up engine, supporting 8K absolute MAC addresses2M packet buffer10K Jumbo frame supports at 1000Mbps duplex modeIEEE 802.1Q VLAN packet transparency supportAutomatic address learning and address agingMade of metal, desktop size and wall-mount designFront panel
ItemDescriptionModelHC-804GP-GPower SupplyPower Supply Mode Mains on loadVoltage RangeAC 100~240VPower ConsumptionThe device <5W, POE power supply <65WNetwork Port ParameterNetwork Ports 1~4 Ports: 10/100/1000Mbps Ethernet port, adaptive control
Uplink 1 10/100/100Mbps RJ45Transmission Distance1~4 Ethernet Port:0~100m
Mandatory 10 Mbps reach up to 250m
1 uplink Ethernet Port:0~100mTransmission Media1~5 Ethernet Port:Cat5e/6 standard UTP cable,POE AgreementIEEE802.3 af/at standardsPOE Power Supply ModeEnd-span methodPOE Power Supply WattageEach port≤30W,Whole device<65WNetwork Switch SpecificationNetwork StandardIEEE802.3 10base-T, IEEE802.3u 100base-TX, IEEE802.3ab 1000base-TSwap ModeStore-and- forwardSwitch Capacity12GbpsMAC Address List8KStatus IndicatorsPower Indicator LightOne power light (green)Optical Fiber Port IndicatorOne fiber link indication light ( green), Green light keeps on when the fiber port is well connectedPOE Indicator1~4 POE indicator light(yellow)POE Network Port LED1~4 port ( green light on RJ45 jack) Keeps on when normally connected, Blinking when transceiver dataProtection LevelSurge ImmunityLevel 3, executive standard:IEC61000-4-5Electrostatic Protection1a touch electric discharge: level 31a Air discharge: level 3 Executive standard:IEC61000-4-2Operating EnvironmentWorking Temperature-10ºC~55ºCStorage Temperature-40ºC-85ºCHumidity(non-congeal)0~95%Mechanical AttributesDimensions (L*W*H)202X140x45MMColorBlackWeight1kgReliabilityMean time between failures (MTBF)>50000h