DC 12V 18.5IPM 40PSI HIGH FLOW PUMP FOR WATER SYSTEM
Application
1. Agriculture/Yacht / RV/Caravan pressurized water system
2. Sprayer fixture (Vehicle-mounted sprayer, electric sprayer)
3. Cleaning machine, Humidifier, Water purification, Medical apparatus
4. Food beverage filling & liquid transfer
5. Any other pressurization system
Backed 1-Year Warranty!
Colors: Balck or required
How a Diaphragm Pump Works
The pump is driven by an AC or DC motor
In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamber has a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet
The volume of flow is determined by several factors including: the number and size of the pump chambers, cam offset, operating pressure, fluid viscosity
Features:
Max Flow rate: 18.5LPM(4.9gpm)
Max Pressure: 40PSI(2.8bar)
Pressure switch protection: With fully automatic ON/OFF control
Anti-Corrosive
Duty cycle: Intermittent
Run dry without damage
Self-Priming
Silent running
Easy to connect
Do OEM as required
Housings: PolypropyleneValves: Viton/EPDMDiaphragm: SantopreneFasteners: Stainless SteelMotor Shell: Coated Steel
Motor Voltage12/24V DCType4 chamber diaphragm pump, self priming, capable of being run dryModeDemand Certifications OptionCE ApprovalLiquid Temperature140°F (60°C) Max.Priming Capabilities6 Feet (1.8 m)Max Pressure40psi (2.8bar)Max Flow rate18.5lpm (4.9gpm)Thermal Overload ProtectedStart working when temperature reach 90°C(+-10%)Inlet/Outlet Ports10/13mm pyramid hose barb, 13mm angle hose barb1/2 NPT thread filter for your choice.Duty CycleIntermittent (under different pressure the continuous working time will also be different)Motor options2 pin connectorOn/off switch