China DC-DC Converter DC Power Converter DC Power Supply DC DC Converter

DC-DC Converter/Dc power converter/Dc power supply/DC DC converter
Two Wire Loop Voltage Mircropower Isolated DC DC Converter
Features:
Low cost, small size.
High power density.
High galvantic isolation.
No heat sink required.
Regulated single/dual output.
Fixed input.
1KV isolation.
Rated 2-5W, 6-12W, 13-20W output
Industrial standard pin-out
PCB Mounting
Over current/short circuit protection
Applications:
Electric Power System, Power monitoring, voltage conversion.
Dual power isolation in digital communication ports of RS232/485, CAN bus.
Power supply isolation in intelligent control, security equipments, telecom, etc.
Safety isolation in ground loop elimination, medical equipments and instrument.
Isolation & power supply for analogue electric circuit ( Transmitter & sensors).
Power supply isolation & transfer for safety monitoring and smart building system.
Ground loop interference control.
Car electric circuit power isolation & distribution.
Battery power supply, voltage transfer, power distribution.
PLC, DCS, PC isolation regulated power supply.
Specification:
Voltage Accuracy: +/- 5 %, max.
Ripple and noise (at 20 MHz BW) 50 mV p-p, max.
Short circuit protection immediately (<1s)
Line Regulation +/- 1, 2 % / 1, 0 % of Vin
Load regulation +/- 5 %, load = 20 ~ 100 %
Temperature coefficient +/- 0, 02 % / ° C
Efficiency 60 % to 85 %
Switching frequency 100 kHz, type.
Environmental Specifications
Operating temperature (ambient) - 40° C to + 85° C
Storage temperature - 55 ° C to + 125 ° C
Derating see below temperature coefficient graph
Humidity ≤ 90 %, non condensing
Cooling Free air convection
Weight 2 g~3 g
SIP Package dimension 19.60 x 6.00 x 10.00 mm
0.77 x 0.23 x 0.39 inch
Case Material UL94-Vo plastic