China DIN Rail Single Output Switching Power Supply with Ce

DIN Rail switching power supply
1. Features:
Universal AC input/ full range
Protections: Short circuit/ Over load/ Over voltage
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
Solation class 2
LED indicator for power on
100% full load burn-in test
2 years warranty
Dimensions: 78*93*56mm (W*H*D)
Specifications:

MODEL
DR-30-5
DR-30-12
DR-30-15
DR-30-24







OUTPUT





DC VOLTAGE
5V
12V
15V
24V
RATED CURRENT
3A
2A
2A
1.5A
CURRENT RANGE
0-3A
0-2A
0-2A
0-1.5A
RATED POWER
15W
24W
30W
36W
RIPPLE & NOISE (max.) Note.2
80mVp-p
120mVp-p
120mVp-p
150mVp-p
VOLTAGE ADJ. RANGE
4.75-5.5V
10.8-13.2V
13.5-16.5V
21.6-26.4V
VOLTAGE TOLERANCE Note.3
±2.0%
±1.0%
±1.0%
±1.0%
LINE REGULATION
±1.0%
±1.0%
±1.0%
±1.0%
LOAD REGULATION
±1.0%
±1.0%
±1.0%
±1.0%
SETUP, RISE TIME
800ms, 60ms,50ms/230VAC at full load
HOLD UP TIME (Typ.)
100ms/230VAC 21 ms/115VAC at full load




INPUT


VOLTAGE RANGE
85 ~ 264VAC 120-370VDC
FREQUENCY RANGE
47 ~ 63Hz
EFFICIENCY (Typ.)
74%
81%
82%
83%
AC CURRENT (Typ.)
0.88A/115VAC 0.48A/230VAC
INRUSH CURRENT (Typ.)
COLD START 15A/115VAC,30A/230VAC


PROTECTION


OVERLOAD
105 -160% rated output power
Protection type: Constant current limiting, recovers automatically after fault condition is removed
OVERVOLTAGE
5.75-6.75V
13.8-16.2V
17.25-20.25V
27.6 -32.4V
Protection type: Shut down o/p voltage, re-power on to recover




ENVIRONMENT


WORKING TEMP.
-10ºC ~ +50ºC (Refer to "Derating Curve")
WORKING HUMIDITY
20 - 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-40 ~ +85"C, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03%/"C (0 ~ 50'C)
VIBRATION
10 ~ 500Hz, 2G 10min./1 cycle, period for60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6

SAFETY &
EMC
(Note 4)

SAFETY STANDARDS
Design refer to EN50178
WITHSTAND VOLTAGE
l/P-0/P:1.5KVAC l/P-FG:1.5KVAC 0/P-FG:0.5KVAC
ISOLATION RESISTANCE
l/P-0/P:100M Ohms / 500VDC / 25'C/ 70% RH
EMC EMISSION
Compliance to EN55011, EN55022 (CISPR22) Class B, EN61000-3-2,-3
EMC IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A

OTHERS

MTBF
441,5K hrs min. MIL-HDBK-217F (25'C)
DIMENSION
78*93*56mm (W*H*D)
PACKING
0.27Kg; 45pcs/14Kg/1.02CUFT





NOTE
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 "c of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
3.Tolerance : includes set up tolerance, line regulation and load regulation.
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

Why choose us?

1.Professional manufacture
2.With complete varieties
3.Accept OEM
4.Considerate in place of after-sales service