China DN80 Diameter Pipelines Water Drainage Sewage Treatment OEM Electromagnetic Flow Meter

DN80 Diameter Pipelines Water Drainage Sewage Treatment OEM Electromagnetic Flow Meter
Electromagnetic Flow meter (Intelligent) is designed and manufactured with the most advanced domestic and abroad technology, featuring high accuracy, reliability, good stability and long service life.
We pay our attention to every detail in the process of the product structure design, material selection, manufacturing, assembly and factory testing etc. With a water tower up to 35m as pressure stabilizer for actual flow calibration, we have a professional production line for electromagnetic flowmeter, also we design and develop a series of software and hardware for electromagnetic flowmeter for mass production to ensure high quality in long term use. The product has backlight and wide temperature-ranged LCD display. With fully practical function, visual display, easy operation, it saves troubles for on-site installation operation and maintenance.
The DGS-001 Electromagnetic Flow meter can be widely used in industrial fields such as petroleum, chemical, metallurgy, water supply and drainage, steel, coal, paper, food, textile, environmental protection and other municipal administration, water conservancy construction field., etc.
The operating principle of the electromagnetic flow meter is based on Faraday's law of magnetic induction.

Common Features:

1: No moving parts in the measuring pipe to facilitate maintenance and management, so sensor has long service life; no obstacle parts, so no pressure loss.
2: Conductivity of measured liquid can reach at least 5 us/cm with various liner materials, which is applicable to measuring acid & alkali & salt solution, slurry, ore slurry, pulp, etc.
3: High accuracy, generally ±0.5%, ±0.3% and ±0.2%.
4: Amend nonlinearity of meter factor to improve measuring accuracy.
5: Wide measuring range, turndown ratio can reach 50:1. Furthermore, electromagnetic flowmeter is only proportional to average flow velocity of measured fluid and not related with flow state (laminar flow or turbulent flow) under the axisymmetric distribution.
6: LCD backlight display, modify parameter online, simple and convenient operation.
7: Low straight pipe requirement, so meter operating normally just needs upstream for 5D and downstream for 3D can ensure.

Product parameters:

ProductDGS-001SizeDN15 - DN1200MediumConductive liquid, slurryTemperatureAmbient :-25 ºC to 65ºC/ Medium: PTFE lining, up to 70ºCFluidFor conductive liquids with conductivity greater than 5 us/cm. For reference note tap water has conductivity between 5-50 us/cmAccuracy0.3%, 0.5%, 1%Repeatability0.2%Rated Pressure1. 0.6Mpa--DN1200
2. 1.0Mpa--DN200~DN1000
3. 1.6Mpa--DN100~DN150
4. 4.0Mpa--DN15~DN80
5. Non-standard can be customized by customerDisplayInstantaneous flowrate, total flow, diagnoticsSignal OutputAnalog 4 - 20mA, isolated
Totalization pulses, frequency 0 - 5kHz, communication RS485Power Supply24 VDC or 120 VACConverter TypeCompact/Remote Protection Grade IP67/ IP68Velocity0.5-10m/s LinerEbonite, Neoprene Gum( DN40-DN1200); Polyurethane( DN25-DN300); F4(DN10-DN1200) ;
F46( FEP)(DN15 -DN600); Flowing DirectionForward, ReverseElectrode Material316L with the following optional electrode materials available: Hastelloy B or C, Titanium, Tantalum and Platinum-lridumElectrode TypeStandardElectrode Number2-4 pcsFlange
& housing material1. Carbon steel/Stainless steel--DN15~DN300
2. Carbon steel--DN350~DN2000Alarm (N.O.)Empty, excitation, high/low flowrate limitCommunicationRS-485/ModBus, GPRS, NB-Iot

Main application:
1) Flow measurement of water supply pipe network
2) Measurement monitoring
3) Zone measurement
4) Regional leakage control
5) Flow measurement in water industries (tap water, industrial water and sewage disposal), metallurgy, chemical industry, textile, papermaking, electric power, pharmacy, food industry, etc.
Our main products:
Factory introduction:
Packing and delivery: